Text preview for : 5991-2850EN Compliance Test Solution Using the E5071C ENA Option TDR - Brochure Solution c20140703 [ part of Agilent 5991-2850EN Compliance Test Solution Using the E5071C ENA Option TDR - Brochure Solution c20140703 [ Agilent 5991-2850EN Compliance Test Solution Using the E5071C ENA Option TDR - Brochure Solution c20140703 [4].pdf
Back to : 5991-2850EN Compliance Te | Home
Keysight Technologies
Compliance Test Solution
Using E5071C ENA Option TDR
Comprehensive measurement solution
for interconnect analysis
Certified Solution For High-speed Digital
Standards
All high-speed digital standards have technical documents defining the
requirement and measurement parameters to ensure interpretability between
devices from different manufacturers. ENA Option TDR is a certified solution
for cable, connector, transmitter, or receiver compliance testing of a variety
of the standard including USB3.0 or HDMI. The solution is used worldwide by
authorized test centers to perform compliance testing for the standard.
All method of implementation (MOI) documents, and state files for the
ENA Option TDR are currently available from the Keysight Technologies, Inc.
web site at www.keysight.com/find/ena-tdr_compliance. State files contain
pre-configured setups in accordance with the standard requirements and allows
for quick and easy measurements of your devices.
ENA Option TDR Features
Features Values
one-box solution Frequency domain, time domain, and eye diagram analysis is
available in a single instrument. By observing both the time and
frequency domain response at the same time, deeper signal
integrity insight can be obtained.
Fast and accurate Due to the low noise architecture, oftentimes averaging is not
measurements required as in traditional TDR oscilloscopes. Real-time analysis
allows for more efficient troubleshooting of designs.
ESD Robustness High ESD robustness (up to 3 kV) is achieved through internal
protection circuits, reducing downtime and repair costs dra-
matically compared to previous solutions.
Easy and quick setup Certified MOI documents that guide through necessary compli-
ance tests are available free of charge. By recalling the state
file, you can easily setup, measure and perform limit testing for
pass/fail judgment.
Hot TDR measurements Hot TDR is the impedance measurement of active devices
under actual operating conditions. The ENA Option TDR pro-
vides faster and more accurate impedance measurements of
transmitters in operating state.
Certified High-speed Digital Standards
Cable & Connector assembly