E4980A Precision LCR Meter_252C 20 Hz to 2 MHz - Configuration Guide 5989-8321EN c20140717 [12].pdf part of Agilent E4980A Precision LCR Meter 252C 20 Hz to 2 MHz - Configuration Guide 5989-8321EN c20140717 [12] E4980A Precision LCR Meter_252C 20 Hz to 2 MHz - Configuration Guide 5989-8321EN c20140717 [12].pdf, Agilent E4980A Precision LCR Meter_252C 20 Hz to 2 MHz - Configuration Guide 5989-8321EN c20140717 [12].pdf text manual preview

Text preview for : E4980A Precision LCR Meter_252C 20 Hz to 2 MHz - Configuration Guide 5989-8321EN c20140717 [12].pdf part of Agilent E4980A Precision LCR Meter 252C 20 Hz to 2 MHz - Configuration Guide 5989-8321EN c20140717 [12] Agilent E4980A Precision LCR Meter_252C 20 Hz to 2 MHz - Configuration Guide 5989-8321EN c20140717 [12].pdf

Back to : E4980A Precision LCR Mete | Home

Keysight Technologies
E4980A Precision LCR Meter
20 Hz to 2 MHz
E4980AL Precision LCR Meter
20 Hz to 300 kHz/500 kHz/1MHz

Configuration Guide
E4980A/E4980AL Configuration Guide Introduction
This guide helps you to define the options and accessories for the E4980A and E4980AL precision LCR meters.

The E4980A is the model number of the 20 Hz to 2 MHz frequency range LCR meter. The E4980AL is the model number of
the low frequency options (20 Hz to 300 kHz/500 kHz/1 MHz) of the E4980A. This is a distributor preferred product and the
model number E4980AL is used only for ordering and shipment purpose. The actual unit of the E4980AL is labeled as the
E4980A (not E4980AL), hence for Keysight Technologies, Inc. service and post-sales support, refer to the model number
E4980A.

For configuring options, see this page for the E4980A, and page 8 for the E4980AL.

E4980A Ordering Guide

The following steps will guide you through configuring your E4980A.

Standard Furnished Item
Description Additional Information
CD-ROM Contains User's Guide (in PDF) and Sample Program. See documentation option for
printed manuals.
CD-ROM Contains Keysight IO Libraries Suite (the latest versions).
USB Cable USB (Type A) to USB (Type Mini-B) cable
Power Cable
Certificate of Calibration
Note: Test Fixture and printed copy of User's Guide are not furnished. See Documentation Option and Available Accessories for the selection of these items.

Step 1. Choose Hardware Option (Mandatory)
Not
Description Option No. Requires Additional Information
Compatible
Bias Current Interface E4980A-002 None 001 Adds a digital interface to allow the E4980A to control
(See Notes 1 the 42841A Bias Current Source.
and 2) (The 42841A was discontinued in December 2012.)
Handler Interface E4980A-201 None None Adds handler interface
(See Note 2)
Scanner Interface E4980A-301 None None Adds scanner interface
(See Note 2)
No Interface E4980A-710 None None Attaches blank panel to the expansion slots
(See Note 2)
Note 1: The E4980A-001 and E4980A-002 can be installed in the same unit but cannot be operated simultaneously.
Note 2: Up to 2 interfaces can be installed in the expansion slots on the rear panel. When no interface is added, two of the E4980A-710 are installed.
When one interface is added, that interface and the E4980A-710 are installed.
Note 3: Refer to Hardware Upgrade for retrofit information on the above options.

2
Step 2. Choose Software Option (If not required, go to Step 3)
Not
Description Option No. Requires Additional Information
Compatible
Power and DC Bias E4980A-001 None 002 Increases test signal level range to 20 V/100 mA rms
Enhancement (See Note 1) max. Adds internal DC bias function controllable from 0