Text preview for : JN1601-TE.pdf part of MAKITA JN1601-TE MAKITA JN1601-TE.pdf
Back to : JN1601-TE.pdf | Home
T ECHNICAL INFORMATION New Tool
Models No. JN1601
Description Nibbler
CONCEPTION AND MAIN APPLICATIONS
Model JN1601 performs clean, precise cutting in keystone plate,
")
deck plate and other corrugated/trapezoidal sheet materials. Die (10-1/4
261mm
holder swivels full 360 for easy cutting at an angle to grooves
177.5mm(7")
in corrugated/trapezoidal sheet materials.
75mm(2-15/16")
Specifications
Continuous Rating (W)
Voltage (V) Current (A) Cycle (Hz) Max. Output(W)
Input Output
100 5.8 50/60 550 300 500
115 5.0 50/60 550 300 500
200 2.9 50/60 550 300 500
220 2.6 50/60 550 300 500
230 2.5 50/60 550 300 500
240 2.4 50/60 550 300 500
Mild steel 1.6 mm (1/16")
Max. cutting capacities Stainless 1.2 mm (3/64")
Aluminum 2.5 mm (7/64")
Outside edge 50 mm (2")
Inside edge 45 mm (1-3/4")
Min. cutting radius
Strokes per minute 2,200
Net weight 1.6kg (3.5 lbs)
Standard equipment
Punch, Die, Wrench 32, Hex Wrench 2.5
Optional accessories
Punch, Die
Features and benefits
1.Double insulated
2.Refer to the attached sheet for more information
The standard equipment for the tools shown may differ form country to country
Slim, trim shape for easy gripping
Slide switch locks on for contin-
uous cutting action.
Die holder swivels a full 360
according to shape of material
and cutting direction, and is
positively locked at 90 each.
7mm(1/4") stroke smoothly slices
through material.
Grooves in die holder serve as
thickness gauge for allowabale
cutting thickness: 1.2mm(3/64")
and 1.6mm(1/16")
Notch in die holder indicates
the cutting line on material.
Chip Disposal: Chips fall below,
not remaining on material, where
they can cause rust. No burrs on Easy replacement of punch/die
surface.