Text preview for : 4305t-TE.pdf part of MAKITA 4305t-TE MAKITA 4305t-TE.pdf
Back to : 4305t-TE.pdf | Home
T ECHNICAL INFORMATION
Models No. 4305T 287 mm
(11-1/4")
New Tool
Description JIG SAW
CONCEPTION AND MAIN APPLICATIONS
Model 4305T is a variable speed orbital action jig saw with 194 mm
new body-grip and knob design, also toolless type. (7-5/8")
One straight and three different orbital cutting actions allow
fast, smooth cutting in steel, wood, plastics, aluminum, etc.
77 mm(3")
Specifications
Continuous Rating (W)
Voltage (V) Current (A) Cycle (Hz) Max. Output(W)
Input Output
100 6.0 50/60 580 320 600
115 5.5 50/60 600 350 600
220 2.9 50/60 600 350 600
230 2.7 50/60 600 350 600
240 2.6 50/60 600 350 600
Length of stroke 26mm(1")
Wood 110mm (4-3/8") when using the jig saw blade B-16L.
Mild steel 10mm (3/8")
Cutting capacities Aluminum 20mm (13/16")
Stroke per minute 500-3,000
Net weight 2.3 kg (5.1 lbs.)
Standard equipment
Jig Saw Blade B-10, BR-13, B-22 (2 pcs. each), Plastic Cover, Plastic Base Plate, Anti-Splintering Device, Hex
Wrench 3
Optional accessories
Circular Guide, Guide Rule (Rip Fence), Vacuum Head, Hose, Various types of Jig Saw Blades
Features and benefits
1.Double insulated
2.Refer to the attached sheet for more information.
The standard equipment for the tools shown may differ from country to country.
4305T
"Tool-less" blade clamp:
Blade can be changed by simply pulling and turning the lever.
Both Makita and Bosch blades can be accepted.
Detachable blade clamp:
Even when clogged with
chip/sawdust, this clamp
can be cleaned completely
as detachable from machine.
"Tool-less" bevel adjustment lever:
Transparent plastic cover Base is fixed so firmly by pulling
(chip shield): the lever that it does not slip
Bevel cutting can be performed during operation.
with this cover on.
"Tool-less" attachment of optional vacuum head:
Vacuum head can be attached on either left or right
side of the base.
More efficient chip/sawdust extraction when used
together with transparent plastic cover.
Following features are the same as Model 4305
Choice of three different orbital cutting and straight actions.
Dial-adjustable variable speed from 500 to 3000 strokes per minute.
You can choose the better one, a steel base plate or plastic one
to match the cutting materials.
Anti-splintering device can be used for splinter-free cuts.
Repair
Repair in the same way as 4304 and 4305 other than shown below.
*Assembling of Balance plate Assemble as shown on the right figure as the balance plate has directions in left/right.
Balance plate
Gear housing
Convex side
*Assembling of Base
When fixing the base, fasten the flanged hexagon nut M5 in a way that the lever 65 can be placed within
the position range shown on the figure.(Reference : 45-55kgf/cm(3.3-4.0ft-lbs))
Use the pan head screw M4X8 to prevent the flanged hexagon nut M5 from turning.
Base Lever 65
Flanged hexagon nut M5
Pan head screw M4X8
10
(position range of lever 65)
Clamp plate
* Disassembling/assembling of blade fix(see the below figure)
Disassembling of the blade fix
1. Turn the blade lever(4304T) or blade thumb screw(4305T) in left turning direction until
they have stopped turning.
2. Turn in left the blade fix protruded over the rod to remove the blade fix.
Assembling of the blade fix
1. Make sure that the blade lever or the blade thumb screw has been turned in left turning direction until
stopped in turning.
2. Screw the blade fix into the rod in 1/4-1 turn.
3. Pick up the blade fix by fingers while using care not to turn it and turn in right turning direction the
blade lever or the blade thumb screw to set them into the rod.
Rod
Blade fix
Circuit drawing
Same as 4304 and 4305.