Text preview for : 51301-ww-1.pdf part of MAKITA 51301-ww-1 MAKITA 51301-ww-1.pdf
Back to : 51301-ww-1.pdf | Home
T ECHNICAL INFORMATION 51301
Subject Changes on blade case, etc.
For Models 5143R(355mm Circular Saw)
Note This information applies to European countries.
Description As described below, six parts have been changed for less rickety.
CURRENT NEW
Tapping Screw
Bind CT 4X12
Blade Case
Base Bridge
Pin 10 Tapping Screw
Bind CT 4x12
(with groove)
Blade Case and Pin 10 are fixed by tapping screw, so
that they become less rickety.
Pin 10 Tolerance is changed to make the gap between Pin 10
and Base Bridge narrower.
Tapping Screw Number of tapping screws fixing Base Bridge and
Bind CT 5X20 Angular Plate ; 2 => 4
Tapping Screw
Bind CT 5X20
Angular Plate (4 PCS)
Tapping Screw Base Bridge
Bind CT 5X20
(2 PCS)
Base Bridge Make the gap between Base bridge and Blade Case
narrower.
Blade Case Rib which contacts with Base Bridge is added to Blade
Case.
Blade Case
Rib
Base Bridge
Interchangeability(I/C)
Item No. Current part Q'ty I/C New part Q'ty Note
Blade Case Complete Blade Case Complete
51 1 <= 1
152497-0 152546-3
Pin 10 The current can be
Pin 10 1 <= 1 used for 5103R
60 268018-9
268008-2
Tapping Screw CT4x12 Interchangeable as a set
55 1
266026-4
Angular Plate Angular Plate
93 1 <= 1
316746-1 316879-2
The new is fixed with
Base Bridge <= Base Bridge two screws when
101 1 1
316750-0 316880-7 either of the currents
is replaced.
Tapping Screw Bind CT5x20 Tapping ScrewCT5x20
69 2 Yes 4
266036-1 266036-1
Note
Interchangeability mark ; <= means that the new part can be substituted for the current.
Implementation
5143R : From serial No.6324E