Text preview for : 6903VD-TE.pdf part of MAKITA 6903VD-TE MAKITA 6903VD-TE.pdf
Back to : 6903VD-TE.pdf | Home
T ECHNICAL INFORMATION
Models No. 6903VD/VDW
New Tool
Description Cordless Impact Driver
188mm(7-3/8") 50mm(2" )
CONCEPTION AND MAIN APPLICATIONS
Model 6903VD/VDW was developed to increase the
maneuverability of Model 6901VD/VDW.
It offers slimmer, more easily gripped handle for
225mm(8-7/8" )
better-balanced, faster and more accurate driving actions.
Model 6903VD is sold with a battery cartridge 9100 but
without a fast charger.
Model 6903VD includes a battery cartridge 9100 and a fast
charger DC9700.
58mm(2-1/4" )
Specifications
DC Magnet Motor (9.6V)
No Load Speed 0-2,200 R/min.
Impact per minute 0-2,800
Max. tightening torque 700Kg.cm (50 fit. lbs)
Capacities
Machine screw and bolt 4mm(5/32")-10mm(3/8")
Net Weight 1.3Kg(2.9 lbs)
Standard equipment
Fast Charger DC9700 (Model 6903VDW only), Battery Cartridge 9100,
Phillips Bit 2-65, 3-65, Bit Piece,
Plastic Carrying Case (Model 6903VDW only)
The standard equipment for the tools shown may differ form country to country
Optional accessories
Phillips Bit 2-45, 2-65, 2-82, 2-110, 2-150, 2-250, 3-45, 3-65, 3-110,
Socket Bit 7-55, 8-55, 10-55, 10-70, 12-86,13-55, 14-55, 17-55,
Bit Piece, Keyless Drill Chuck, Drill Chuck (Conventional type), Fast Charger DC9012,
Fast Charger DC9700, Battery Cartridge 9100
Features and benefits
1. Well-designed handle (gripping angle and gripping position) makes bit centering easier
and operation more convenient.
2. Improved sleeve retains the bit surely because the sleeve will not be moved
by pressure from forward.
3. Built-in feedback circuit produces relatively high-torque even at low speed.
The following features are ths same as Model 6901VD/VDW.
4. Variable speed for pinpoint positioning and sure starting.
5. Drives even small (M4) screws.
6. Reversing switch for removing screws, bolts.
7. Impact-type driving will not damage screw head.
8. With electric brake for fastening convenience.
REPAIR
Assembling
1. Flat washer between spindle complete and spur gear has to be installed in the
housing without separating it from ball bearing.
2. Taping screws have to be fastened
with the fastening torque, 12 - 16 Kgfcm. Ball bearing Flat washer
Spur gear
CIRCUIT DIAGRAM
DC Motor
Red mark
Lead wire (Black)
Variable speed switch
M1 M2
Lead wire (Red)
Lead wire (Red)
Lead wire (Black)
Battery holder