Text preview for : DC1000-TE.pdf part of MAKITA DC1000-TE MAKITA DC1000-TE.pdf
Back to : DC1000-TE.pdf | Home
T ECHNICAL INFORMATION New Tool
For Models DC1000
Description One-Hour Charger
130
mm
CONCEPTION AND MAIN APPLICATIONS 21
1m
m
Quick one-hour charger for Battery1000 used in #5600D(160mm Circular saw).
A combination of the charger and 5600D is Model 5600DW.
88mm
Specifications
Input Output
Voltage(V) Cycle(Hz) Input capacity(VA) Voltage(V) Current(A)
100 50/60 85 10.8 3.5
Function:One hour charging
Features and benefits
(1) Charging time : only one hour
(2) By the light ON/OFF, you know the start/finish of chargingeasily.
(3) Safe,because the current stops automatically when Battery capacity becomes full.
Repair
In the following cases, please order an item concerned.
Condition Cause/Faulty points Testing way/Solution Replacing parts
Check the continuity
Broken cord Vinyl cord #6679126
by your eyes or Tester
Breakage or faulty Check the continuity
Transformer #6490433
soldering in Transformer by Tester
Check the continuity by your
Blown Fuse eyes or Tester. Fuse must be Fuse #6525620
eplaced
No charging available
After checking by eyes, widen
Contact failure or varnish
Terminals or remove sticking Spring terminal #6540545
sticking in Spring terminals
subjectfor better contact.
Check the continuity by your
Faulty soldering of circuit
eyes or Tester ( If unclear, Charging circuit #6310607
parts or broken print wires
replacethe whole circuit)
Even if charging time is
long enough,it will not Relay on circuit or Battery Replace Charging Charging circuit #6310607
stop automatically. thermostat has melted down. circuit or Battery. Battery #6320325
When you do not find out the failure cause, please send the circuit to the 1st Technical control section of Makita hea d
office for repair.