Text preview for : 6337D-TE.pdf part of MAKITA 6337D-TE MAKITA 6337D-TE.pdf
Back to : 6337D-TE.pdf | Home
T ECHNICAL INFORMATION
Models No. 6207D, 6217D, 6237D
6317D, 6337D, 6347D L
PRODUCT
P 1 / 13
Description 9.6V, 12V, 14.4V Cordless Driver Drills 10mm (3/8")
12V, 14.4V, 18V Cordless Driver Drills 13mm (1/2")
CONCEPT AND MAIN APPLICATIONS H
These six tools have been developed as upgraded successors
to the existing Makita tools of Model 6203D series, and features
increased power and enhanced mechanical parts.
One of the remarkable features is the repalceable armature for
reduced repair cost.
Listed below are variations of these new models.
W
Battery Dimensions: mm ( " )
Model No. Battery Charger
Type 10mm (3/8")
10mm (3/8")
6207DWDE 9134 (9.6V, 2.6Ah) / 2pcs Ni-MH DC1413 Model No. 6207D 6217D 6237D
6217DWDE 1234 (12V, 2.6Ah) / 2pcs Ni-MH DC1413 233 233 233
Length ( L )
6237DWDE 1434 (14.4V, 2.6Ah) / 2pcs Ni-MH DC1413 (9-1/8) (9-1/8) (9-1/8)
77 94 94
6317DWAE 1222 (12V, 2.0Ah) / 2pcs Ni-Cd DC1413 Width ( W ) (3) (3-11/16) (3-11/16)
6317DWDE 1234 (12V, 2.6Ah) / 2pcs Ni-MH DC1413 243 243 247
Height ( H )
6317DWFE 1235 (12V, 3.0Ah) / 2pcs Ni-MH DC1413 (9-9/16) (9-9/16) (9-3/4)
13mm (1/2")
6337DWAE 1422 (14.4V, 2.0Ah) / 2pcs Ni-Cd DC1413 13mm (1/2")
6337DWDE 1434 (14.4V, 2.6Ah) / 2pcs Ni-MH DC1413 Model No. 6317D 6337D 6347D
6337DWFE 1435 (14.4V, 3.0Ah) / 2pcs Ni-MH DC1413 243 243 243
Length ( L )
6347DWAE 1822 (18V, 2.0Ah) / 2pcs Ni-Cd DC1803 (9-9/16) (9-9/16) (9-9/16)
6347DWDE 1834 (18V, 2.6Ah) / 2pcs Ni-MH DC1803 94 94 95
Width ( W ) (3-11/16) (3-11/16) (3-3/4)
6347DWFE 1835 (18V, 3.0Ah) / 2pcs Ni-MH DC1803
243 247 251
Height ( H )
(9-9/16) (9-3/4) (9-7/8)
Specification
See page 2.
Standard equipment
* Battery cover ...................................................................... 2 pcs.
* + - Bit 2-45 ......................................................................... 1 pc.
* Plastic carrying case ........................................................... 1 pc.
< Note > The standard equipment for the tool shown may differ from country to country.
Optional accessories
Model No. Battery Charger
6207D 9120, 9122, 9133, 9134, 9135, 9135A DC1413, DC1439, DC1803, DC1822, DC9711
6217D 1220, 1222, 1233, 1234, 1235, 1235A DC1413, DC1439, DC1803, DC1822
6237D 1420, 1422, 1433, 1434, 1435 DC1413, DC1439, DC1803, DC1822
6317D 1220, 1222, 1233, 1234, 1235, 1235A DC1413, DC1439, DC1803, DC1822
6337D 1420, 1422, 1433, 1434, 1435 DC1413, DC1439, DC1803, DC1822
6347D 1822, 1833, 1834, 1835 DC1803, DC1822
P 2 / 13
Specification
10 mm 13 mm
Model No.
Specification 6207D 6217D 6237D 6317D 6337D 6347D
Voltage (V) 9.6 12 14.4 12 14.4 18
Chuck capacity (mm [inch]) 1 - 10 [1/32 - 3/8] 1.5 - 13 [1/16 - 1/2]
Drilling capacity Steel 10 [3/8] 13 [1/2]
(mm [inch]) Wood 25.4 [1] 32 [1-1/4] 25.4 [1] 32 [1-1/4] 38 [1-1/2]
No load speed High 0 - 1,300 0 - 1,300
(rpm = min -1) Low 0 - 400 0 - 400
Declutching torque
1 - 6 [10 - 60 / 0.7 - 4.4] 1 - 6 [10 - 60 / 0.7 - 4.4]
(N.m [kgf.cm / ft.lbs])
Max. fastening torque Hard joint 50 [500/ 440] 60 [600/ 530] 65 [650/ 580] 60 [600/ 530] 65 [650/ 580] 80 [800/ 710]
(N.m [kgf.cm/ in.lbs]) Soft joint 20 [200/ 180] 25 [250/ 220] 30 [300/ 270] 25 [250/ 220] 30 [300/ 270] 35 [350/ 310]
Electric brake Yes Yes
16 stages 16 stages
Torque settings
( + drill mode) ( + drill mode)
Variable speed control Yes Yes
Mechanical 2-speed Yes Yes
Reverse switch Yes Yes
Net weight with battery: Kg [lbs] 1.7 [3.7] 1.9 [4.2] 2.0 [4.4] 2.0 [4.4] 2.1 [4.6] 2.4 [5.3]
Features and benefits
New Gear Assembly More Powerful Output
Prevents gears from falling out of place. High/ Low Realized by stronger motor power plus
Prevents clutch from actuating acciden- more efficient power transmission by new
Speed Change Lever gear assembly
tally in drilling mode.
New Separable Type 31 Motor
Change Lever for
1. Uses strong magnet for increased power.
Drill/ Screwdriver Mode 2. Construction without motor case allows;
Working mode can be changed Light motor body.
simply by one action. Big diameter fan for increased cooling
efficiency
Independently replaceable armature
Adjusting Ring Externally Accessible Brushes
For 16 stage torque settings
Palm Fitting Soft Grip
For controlled operation and
Metal Gears for operator comfort
Enhanced Gear Assembly
All the gears in gear assembly are
made of metal. [Model 6207D] Bit Holder *
For storing a driver bit
Note: The feature with a mark* is as same as tools of
Model 6203D series.
Comparison of products
Model No. Makita Competitor A
6217D/ 6237D/ 6213D/ 6233D A-14.4-0
Specification 6207D 6347D 6203D 6343D A-9.6 A-12 A-18
6317D 6337D 6313D 6333D A-14.4-1
Voltage (V) 9.6 12 14.4 18 9.6 12 14.4 18 9.6 12 14.4 18
Chuck capacity 10 [3/8]/ 10 [3/8]/ 10 [3/8]/ 10 [3/8]/ 10 [3/8]/
10 [3/8] 13 [1/2] 10 [3/8] 13 [1/2] 10 [3/8] 10 [3/8] 13 [1/2]
(mm [inch]) 13 [1/2] 13 [1/2] 13 [1/2] 13 [1/2] 13 [1/2]
Hard joint 50 [440] 60 [530] 65 [580] 80 [710] 25 [220] 31 [270] 35 [310] 50 [440] 38 [340] 41 [360] 50 [440]
(Not available)
Soft joint 20 [180] 25 [220] 30 [270] 35 [310] 14 [120] 17 [150] 22 [200] 25 [220] 20 [180] 22 [200] 30 [270]
Evaluation on ---- ---- ---- ---- 23 [200] 26 [230] 31 [275] 45 [400] 23 [200] 35 [310] 38 [334] 45 [400]
Max. fastening
torque
(N.m [in.lbs])
old standard
Externally accessible
Yes Yes Yes No No
brushes
Aluminum gear housing No No Yes No No
Side grip No No Yes No No
Soft grip handle Yes No No No Yes
16 stages + 17 stages + 16 stages + 17 stages + 23 stages +
Torque settings
drill mode drill mode drill mode drill mode drill mode
No load speed High 0 - 1,300 0 - 1,200 0 - 1,400 0 - 1,300 0 - 1,400 0 - 1,100 0 - 1,450
( rpm=min -1 ) Low 0 - 400 0 - 400 0 - 450 0 - 400 0 - 450 0 - 300 0 - 450
Length 233 233 [9-1/8]/ 233 [9-1/8]/ 243 233 233 [9-1/8]/ 233 [9-1/8]/ 255 252 252 252
(mm [inch]) [9-1/8] 243 [9-9/16] 243 [9-9/16] [9-9/16] [9-1/8] 243 [9-9/16] 243 [9-9/16] [10] [9-7/8] [9-7/8] [9-7/8]
Width 77 94 94 95 77 94 94 95 83 83 86
(Not available)
(mm [inch]) [3] [3-11/16] [3-11/16] [3-3/4] [3] [3-11/16] [3-11/16] [3-3/4] [3-1/4] [3-1/4] [3-3/8]
Dimensions
Height 243 243 247 251 241 241 246 249 235 235 235
(mm [inch]) [9-9/16] [9-9/16] [9-3/4] [9-7/8] [9-1/2] [9-1/2] [9-11/16] [9-3/4] [9-1/4] [9-1/4] [9-1/4]
Net weight (with battery): 1.7 1.9 [4.2]/ 2.0 [4.4]/ 2.4 1.7 1.9 [4.2]/ 2.0 [4.4]/ 2.5 1.5 1.9 2.2 2.5
kg [lbs] [3.7] 2.0 [4.4] 2.1 [4.6] [5.3] [3.7] 2.0 [4.4] 2.1 [4.6] [5.5] [3.4] [4.2] [4.9] [5.5]
P 3 / 13
P 4 / 13
Comparison of products
Time Required for Driving a Screw/ The Number of Screws Driven/
Drilling a Hole Holes Drilled on a Single Full-Charge
9.6V Models (Numbers on the bars below are relative values when the capacities of 6203D are indexed at 100.)
Test 1: Drilled holes in 38mm (1-1/2") thick Spruce; with 7/8" Spade bit ; on High speed drill mode.
6207D 110 5.9sec 6207D 2.6Ah 115 50 holes
6203D 100 6203D 2.6Ah 100
Slow 50 100 Fast Few 50 100 Many
Test 2: Drove 1/4" x 3" Lag bolts ; into Spruce; on Low speed screwdriver mode.
6207D 95 7.3sec 6207D 2.6Ah 120 68
screws
6203D 100 6203D 2.6Ah 100
Slow 50 100 Fast Few 50 100 Many
12V Models (Numbers on the bars below are relative values when the capacities of 6313D are indexed at 100.)
Test 1: Drilled holes in 38mm (1-1/2") thick Spruce; with 7/8"Spade bit ; on High speed drill mode.
6317D 120 3.8sec 6317D 2.6Ah 120 72
holes
6316D 105 6316D 2.6Ah 105
6313D 100 6313D 2.6Ah 100
Competitor A 115 Competitor A 1.7Ah 90
A-12 A-12
Competitor B Competitor B
B-1 95 B-1 2.0Ah 85
Competitor C Competitor C
C-1 105 C-1 1.7Ah 85
Slow 50 100 Fast Few 50 100 Many
Test 2: Drove 1/4" x 3" Lag bolts ; into Spruce; on Low speed screwdriver mode.
6317D 95 5.9sec 6317D 2.6Ah 135
95 screws
6316D 100 6316D 2.6Ah 100
6313D 100 6313D 2.6Ah 100
Competitor A Competitor A
A-12 100 A-12 1.7Ah 85
Competitor B Competitor B
B-1 100 B-1 2.0Ah 105
Competitor C Competitor C
C-1 95 C-1 1.7Ah 95
Slow 50 100 Fast Few 50 100 Many
P 5 / 13
Time Required for Driving a Screw/ The Number of Screws Driven/
Drilling a Hole Holes Drilled on a Single Full-Charge
Test 3: Drilled holes in 38mm (1-1/2") thick Spruce; with 1" Auger bit ; on Low speed drill mode.
6317D 105 5.9sec 6317D 2.6Ah 125 64
holes
6316D 105 6316D 2.6Ah 115
6313D 100 6313D 2.6Ah 100
Competitor A Competitor A 1.7Ah 90
A-12 105 A-12
Competitor B Competitor B
B-1 105 B-1 2.0Ah 95
Competitor C Competitor C
C-1 105 C-1 1.7Ah 95
Slow 50 100 Fast Few 50 100 Many
14.4V Models (Numbers on the bars below are relative values when the capacities of 6333D are indexed at 100.)
Test 1: Drilled holes in 38mm (1-1/2") thick Spruce; with 7/8" Spade bit ; on High speed drill mode.
6337D 120 3.2sec 6337D 2.6Ah 110 91 screws
6336D 110 6336D 2.6Ah 110
110
6333D 100 6333D 2.6Ah 100
Competitor A Competitor A
A-14.4-0 120 A-14.4-0 1.7Ah 95
Competitor B Competitor B 105
B-2 115 B-2 2.4Ah
Competitor C Competitor C
C-2 100 C-2 1.7Ah 75
Competitor D Competitor D
D-1 110 D-1 3.0Ah 110
Slow 50 100 Fast Few 50 100 Many
Test 2: Drove 1/4" x 3" Lag bolts ; into Spruce; on Low speed screwdriver mode.
6337D 100 5.9sec 6337D 2.6Ah 2.6Ah
120 111
screws
6336D 100 6336D 2.6Ah 105
6333D 100 6333D 2.6Ah 100
Competitor A Competitor A 1.7Ah 85
110
A-14.4-0 A-14.4-0
Competitor B 110 Competitor B 2.4Ah 115
B-2 B-2
Competitor C 90 Competitor C 1.7Ah 80
C-2 C-2
Competitor D Competitor D
D-1 110 D-1 3.0Ah 125
Slow 50 100 Fast Few 50 100 Many
P 6 / 13
Time Required for Driving a Screw/ The Number of Screws Driven/
Drilling a Hole Holes Drilled on a Single Full-Charge
Test 3: Drilled holes in 38mm (1-1/2") thick Spruce; with 1" Auger bit ; on Low speed drill mode.
6337D 105 5.9sec 6337D 2.6Ah 2.6Ah
120 79
holes
6336D 105 6336D 2.6Ah 115
6333D 100 6333D 2.6Ah 100
Competitor A 115 Competitor A 1.7Ah 105
A-14.4-0 A-14.4-0
Competitor B Competitor B 105
B-2 110 B-2 2.4Ah
Competitor C Competitor C
C-2 100 C-2 1.7Ah 85
Competitor D Competitor D
D-1 110 D-1 3.0Ah 115
Slow 50 100 Fast Few 50 100 Many
18V Models (Numbers on the bars below are relative values when the capacities of 6343D are indexed at 100.)
Test 1: Drilled holes in 38mm (1-1/2") thick Spruce; with 7/8" Spade bit ; on High speed drill mode.
6347D 100 2.5sec 6347D 2.6Ah 115 152 holes
6343D 100 6343D 2.6Ah 100
Competitor A Competitor A
A-18 100 A-18 2.4Ah 95
Competitor B Competitor B
B-3 85 B-3 1.3Ah 40
Slow 50 100 Fast Few 50 100 Many
Test 2: Drove 1/4" x 3" Lag bolts ; into Spruce; on High speed screwdriver mode.
6347D 120 2.2sec 6347D 2.6Ah 135
148 screws
6343D 100 6343D 2.6Ah 100
Competitor A 120 Competitor A
A-18 A-18 2.4Ah 110
Competitor B Competitor B
B-3 100 B-3 1.3Ah 45
Slow 50 100 Fast Few 50 100 Many
Test 3: Drove 3/8" x 3-1/2" Lag bolts ; into Spruce; on Low speed screwdriver mode.
6347D 110 4.8sec 6347D 2.6Ah 120 78
screws
6343D 100 6343D 2.6Ah 100
Competitor A 100 Competitor A 2.4Ah 95
A-18 A-18
Competitor B 95 Competitor B 1.3Ah 45
B-3 B-3
Slow 50 100 Fast Few 50 100 Many
Test 4: Drilled holes in 38mm (1-1/2") thick Spruce; with 1" Auger bit ; on Low speed drill mode.
6347D 110 4.8sec 6347D 2.6Ah 125 138
holes
6343D 100 6343D 2.6Ah 100
Competitor A 110 Competitor A 2.4Ah 100
A-18 A-18
Competitor B 100 Competitor B 1.3Ah 45
B-3 B-3
Slow 50 100 Fast Few 50 100 Many
P 7 / 13
Hint on setting torque
Selecting Optimum Torque
The graph below shows the relation between the torque-setting number on adjusting ring and fastening torque
(= declutching torque), and the chart below the graph shows what number on the adjusting ring is optimum for
the screw to drive. Please refer to them when selecting torque; they will help you choose an optimum
torque-setting number to suit the screw to drive.
(The graph and the chart are available to all tools of Model 6207D series.)
Note: Actual fastening torque is not on the theoretical line of the graph.
Advantages of 16 Torque Settings
Optimum torque can be set for every size of machine screw from M4 to M6.
Wood screws can be driven with their heads flush with each other more precisely than ever even though the
screws vary in thickness or length, or the wood workpieces vary in hardness.
[ft.lbs] (kgf.cm) N.m
[5.1] (70) 7
[4.4] (60) 6
[3.6] (50) 5
(Declutching Torque)
Fastening torque
[3.0] (40) 4
[2.2] (30) 3
[1.5] (20) 2
[0.7] (10) 1
[0] (0) 0
The Torque-setting Number
on Adjusting Ring 1 2 4 6 8 10 12 14 16
Machine screw M4 M5 M6