Text preview for : 74190-WW-1.pdf part of MAKITA 74190-WW-1 MAKITA 74190-WW-1.pdf
Back to : 74190-WW-1.pdf | Home
TECHNICAL INFORMATION
Subject Addition of Groove in Sleeve 14,
74190
September, 2005
Change of Grease
For Models BTD130F, BTD140
Country All countries
Description Regarding Sleeve 14 of Hammer case complete, a groove for grease has been added.
Makita grease N No.2 has been replaced by Makita Grease FA No.2 for lubrication between;
1) the sleeve 14 and Anvil.
2) one end of Spindle and depression of Anvil.
See illustration below.
Groove in Sleeve 14
(Sleeve 14 is the component of Hammer case complete)
Spindle
Anvil
Put each 0.5g of Makita grease FA No.2 into designated
positions instead of Makita grease N No. 2.
Interchangeability(I/C)
Item No. Current part Q'ty I/C New part Q'ty Note
Hammer Case Complete Hammer Case Complete The part No. remains the
016 1 1
154590-6 154590-6 same.
Makita Grease N No.2 Makita Grease N No.2 The required amount has
(16Kg) 4g (16Kg) 3g decreased due to addition
042005-4A 042005-4A of Makita grease FA No.2.
Makita Grease FA No.2
(2.5Kg) 1g
042025-8A
Interchangeability mark ;
The arrow means that the new part can be substituted for the current.
Implementation
BTD130F for all countries except USA: From serial No. 8812E (September 2005)
BTD130F for USA: From serial No. 6229E (August 2005)
BTD140: From serial No. 1131E (September 2005 except for USA, August 2005 for USA)