Text preview for : 49251-ww-1.pdf part of MAKITA 49251-ww-1 MAKITA 49251-ww-1.pdf



Back to : 49251-ww-1.pdf | Home

T ECHNICAL INFORMATION 49251

Subject Change on motor housing and armature

For Models 9029, 9029S, 9039, 9039S, 9027, 9027S, 9037 and 9037S (Disc Grinder)

Note Ground-down armature will be supplied as replacement parts till July, 1995.
Description
1. The motor housing will be changed in material. To differentiate the new type motor housing from the current type on, letter
"R" will be engraved on the new type one as shown in the figure below.




R



Letter "R" will be engraved here



2. The armature has been ground down a little bit (0.2 mm; 0.008") in diameter since July, 1994. But from now on, it will not
be ground down.

Note
Ground-down armature will be supplied as replacement parts till July, 1995.

Interchangeability(I/C)

Item No. Current part Q'ty I/C New part Q'ty Note
Motor housing ass'y 1 Motor housing ass'y
32 <= 1
125036-9 125036-9
Armature 1 Armature 115V. For 9029, 9029S,
5 Yes 1
B33702 514971-0 9027and 9027S
5 Armature Armature 220V. For 9029, 9029S,
1 Yes 1
B33704 516593-2 9027 and 9027S
5 Armature Armature 240V. For 9029, 9029S,
1 Yes 1
B33705 516594-0 9027 and 9027S
Armature Armature 115V. For 9039, 9039S,
5 1 Yes 1
B33706 516501-3 9037 and 9037S
5 Armature 1 Armature 1 220V/240V. For 9039,
Yes
B33707 516598-2 9039S, 9037 and 9037S

Note
Interchangeability mark : <= mark indicates that the new type part can be substituted for the current type part.

Implementation
9029: From serial No. 7940E 9029S: From serial No. 65066E
9039: From serial No. 13083E 9039S: From the next order
9027: From serial No. 28492E 9027S: From the next order
9037: From the next order 9037S: From the next order