Text preview for : 48013-ww-1.pdf part of MAKITA 48013-ww-1 MAKITA 48013-ww-1.pdf
Back to : 48013-ww-1.pdf | Home
T ECHNICAL INFORMATION 48013
Subject Change on wiring
For Models 9540, 9541 and 9542 (Angle Grinder)
Note This information applies to the following countries only:
U.K., Austria, Switzerland, Germany, Spain, France, Italy, Finland and Sweden
Description
1. The rear covers (R) and (L) will be changed from green to black in color.
2. A rib for settling the support will be added to the motor
housing complete.
Rib (added)
3. The wiring will be changed as follows.
Current New
Switch
Support
Switch block unit
Noise suppressor
Switch
Strain relief
Cord guard
Strain relief
Noise suppressor
Cord guard
Connector body Tapping screw 4x18
Connector body cover
Tapping screw 4x18 Strain relief
Wiring diagram
Interchangeability(I/C)
Item No. Current part Q'ty I/C New part Q'ty Note
Rear cover set Rear cover set
19 1 <= 1
182576-0 182705-5
Motor housing complete Motor housing complete
30 1 <= 1
159613-5 159787-2
66 Switch block unit Support
1 No 1
632463-8 687073-6
Spring terminal
2
654133-9
Terminal block
1 Interchangeable as a set
654531-7
Receptacle
3
654079-9
Receptacle
1
654082-0
Noise suppressor
1
645253-0
Note
1. <= mark indicates that the new type parts can be substituted for the current type parts.
2. We will continue to supply the switch block unit as a replacement part. But the spring terminals will be separated from the
switch block unit. Install them on the switch block unit as shown below.
Use flat surface of slotted
Switch block unit screwdriver to push spring terminal
Spring terminal
Switch block unit set
Install spring terminal with its
flat surface facing down
Use the following part Nos. when ordering.
Part name Part No. Price
Switch block unit set 182692-8
(including two spring terminals)
Spring terminal 654134-7
(constituent part of switch block unit)
Implementation
From the next order