Text preview for : DA3000R-TE.pdf part of MAKITA DA3000R-TE MAKITA DA3000R-TE.pdf
Back to : DA3000R-TE.pdf | Home
T ECHNICAL INFORMATION
Models No. DA3000R
New Tool
Description 10 mm angle drill
CONCEPTION AND MAIN APPLICATIONS
The model is similar to the model DA3000 and DA3000V except for
for the newly employed reversible function and developed at the request
from the export markets. The model displays its advantages in the
wider uses, such as removing screws, and pulling wood working drills
out of wood material.
Knob (to switch between the forward and reverse rotation.)
[Outside drawing of DA3000R]
Standard equipment
Same as for DA3000 and DA3000V models.
Optional accessories
Same as for DA3000 and DA3000V models, except the following.
It exhibits its advantages in removing screws and pulling wood working drills out of wood material with the variable
speed reversible motor.
Capacity
Same as for DA3000 and DA3000V models.
Repair
Same as for DA3000 and DA3000V models, except for the motor.
The pin moves up when the switch is turned on.
(i) The reversible switch can not be operated unless the
variable switch is turned off to protect the reversible
switch as shown in the fig. on the right.
Therefore you should never install the switch for Switch(for reverse)
DA3000V model by mistake, otherwise the reversible
switch could be broken. Switch cover C
Switch
(different from the one for DA3000V model)
Motor housing cover
The standard equipment for the tools shown may differ from country to country.