Text preview for : 51232-ww-1.pdf part of MAKITA 51232-ww-1 MAKITA 51232-ww-1.pdf
Back to : 51232-ww-1.pdf | Home
T ECHNICAL INFORMATION 51232
Subject Changes on side handle and carrying case
For Models HR5000,HR5000K(50mm Rotary Hammers)
Note This information applies to
HR5000 All Countries
HR5000K All Countries except United Kingdom
Description As in illustrated below, side handle has been changed for lower cost.
Current New
Wing Nut M10 Hex.Bolt M8X150
Spling Washer 10 Upper Handle Base
Set Bolt
M10X20
Handle
Handle Base Spring 62
Side Handle Split Pin 3.0-20 Wing Nut M8
Lower Handle Base Side Handle
Grip 38
The material of side handle is changed
from steel to resin and rubber. When you
put the machine in plastic carring case,
swivel the side handle forward by
loosening Wing Nut M8.
Interchangeability(I/C)
Item No. Current part Q'ty I/C New part Q'ty
88 Side Handle 1 No Side Handle 1
343519-9 416061-4 The current remains
Grip 38 1 available for
273492-8 replacement.
Split Pin 3.0-20 2
952257-8
Wing Nut M10 1 No Wing Nut M8 1 Interchangeable
89
as a set
259020-3 252640-2
91 Set Bolt M10X20 1 No Hex Bolt M8X150 1
265902-9 265439-6
120 Handle Base 1 No Upper Handle Base 1
414774-1 416060-6
121 Lower Handle Base 1
416089-2
Spring Washer 10 1
942251-8
HR5000
U.K.,France,Germany,
Netherlands,Spain,
Plastic Carrying Italy,Reunion,Algeria,
400 Steel Carrying Case 1 No 1
Case Complete Austria,Sweden,
Norway,Finland,
Swizerland,U.S.A.,Guam
and Canada
182703-9 150589-9
Plastic Carrying HR5000K
400 Steel Carrying Case 1 No 1
Case Complete
182701-3 150582-3
Note
Correction of I/C(Interchangeability) in TEC-126/95(R) and TEC-127/95(R):
I/C was "Yes" in the Technical Informations.
However, it is now "No" as the side handle has been changed as described above.
Implementation
HR5000 : From serial No.31817E
HR5000K : From serial No.39379E