Text preview for : 43873-ww-1.pdf part of MAKITA 43873-ww-1 MAKITA 43873-ww-1.pdf
Back to : 43873-ww-1.pdf | Home
T ECHNICAL INFORMATION 43873
Subject Change on vise assembly
For Models 2412N and 2414 (Portable Cut-off)
Note This information applies to Models 2412N and 2414 with a conventional vise assembly.
Models 2412N and 2414 for some countries are already equipped with a new type vise
assembly (quick release vise assembly).
Description The vise assembly will be changed as follows.
Current New
(conventional vise assembly) (quick release vise assembly)
10
11
11
12
12 15
7
10
13 9
9 16
15
8
8
6
6
4
2 14
3
5 5
1 1
Note
The item Nos. shown in the figures above correspond to the item Nos.
shown in the "Interchangeability" table below.
How to operate the quick vise assembly: By flipping the
vise nut to the left, the vise is released, and rapidly moves
in and out. By flipping the vise nut to the right, the vise Vise nut
remains secured.
Released Position
Secured Position
Vise Handle
Interchangeability(I/C)
Item No. Current part Q'ty I/C New part Q'ty Note
Handle 130 Handle 120
1 No
272021-4 272021-4
Knob 20
2
271607-1
Pin 8
3
256614-5
Stop ring E-6
4
961012-7
Spring pin 5-28 Spring pin 5-20
5 No
951169-2 951163-4
Vise screw Vise screw
6 No
323689-0 322239-8
Screw cover
7
342497-0
Spring pin 4-20 Spring pin 3-18 Interchangeable as a set
8 No
951116-3 951066-2
Flat washer 12 Flat washer 8
9 No
253744-3 253731-2
Flat washer 12 Flat washer 8
10 No
253052-2 253731-2
Hex bolt M8 Screw M8
11 No
251679-2 265922-3
Vise plate Vise plate
12 No
342495-4 343546-6
Connector
13
342496-2
Leaf spring
14
232047-8
Vise nut Vise nut
15 No
311402-8 322209-7
Screw guide
16
311830-7
Implementation
2412N: From serial No. 250537E
2414 : From serial No. 803388E except No. 803838E - No. 804287E
Note
Tools with serial Nos. 803838E - 804287E have the current type vise assembly.