Text preview for : 1051D-TE.pdf part of MAKITA 1051D-TE MAKITA 1051D-TE.pdf
Back to : 1051D-TE.pdf | Home
T ECHNICAL INFORMATION
Models No. 1051D
PRODUCT
P1/4
Description 14.4V Cordless Planer
CONCEPTION AND MAIN APPLICATIONS W
Model 1051D is the cordless power planer 50mm
(14.4V) developed from our existing model
1050D(12V), having the same power as 1050D,
but features longer run-time on one battery H
pack charge.
The variations of this model are as follows.
L
Model No. Battery Charger Carrying Case
1051DZ No No No Dimensions : mm ( " )
1051DWA 1422 DC1411 Yes Width ( W ) 118 (4-5/8)
1051DWAE 1422 /2 pcs. DC1411 Yes Height ( H ) 160 (6-5/16)
1051DWD 1434 DC1411 Yes Length ( L ) 297 (11-11/16)
1051DWDE 1434 /2 pcs. DC1411 Yes
Specification
Voltage 14.4V
No load speed (min-1=rpm) 9,000
Max. planing width 50mm[1-31/32"]
Max. planing depth 0.5mm[0.02"]
Shiplapping Max. depth 15mm[9/16"]
Net weight : Kg ( lbs ) 2.2 (4.8)
Charging time
Charging time Charging time Charging time Charging time
Battery type No. with charger DC1411 with charger DC1439 with charger DC1801 with charger DC1422
1420 (1.3 Ah Ni-Cd.) Approx. 40 min. Approx. 10 min. Approx. 40 min. Approx. 45 min.
1422 (2.0 Ah Ni-Cd.) Approx. 60 min. Approx. 16 min. Approx. 60 min. Approx. 70 min.
1434 (2.6 Ah Ni-MH.) Approx. 75 min. Approx. 25 min. Approx. 75 min. Approx. 85 min.
1435 (3.0 Ah Ni-MH.) Approx. 90 min. Approx. 30 min. Approx. 90 min. Approx. 100 min.
< Note > The above figures about charging time can be changeable depending on
the conditions of batteries, outside temperature, etc..
Standard equipment
* Dust bag assembly ......... 1 pc.
* Rip fence ......................... 1 pc.
* Battery cover .................. 1 pc. for 1051DWA, 1051DWD
* Battery cover .................. 2 pcs. for 1051DWAE, 1051DWDE
* Hex wrench 4 ................. 1 pc.
< Note > The standard equipment for the tool shown may differ from country to country.
Optional accessories
* TCT. mini planer blade 50mm * Charger DC1411
* Battery 1420 * Fast charger DC1439
* Battery 1422 * Charger DC1801
* Battery 1434 * Automotive charger DC1422
* Battery 1435
Features and benefits P2/4
20% more working than 12 V
Safety Lock-off Button
can be switched with
either hand.
Dust Bag (standard accessory)
14.4V Battery
Blade width 50mm Electric Brake System
Shiplapping : 15mm
Max. planing depth: 0.5mm Low Noise
Hex. Wrench
Chamfering Function
V groove on the front base (for setting planer blades)
enables 0 to 5.6mm chamfering. can be stored inside.
Comparison of products
Model Makita
Specification 1051D 1050D
Voltage (V) 14.4 12
Equipped motor RS550VF-6532 RS550VF-7027
Planing width : mm ( " ) 50 (1-31/32) 50 (1-31/32)
Max. planing depth : mm ( " ) 0.5 ( 0.02) 0.5 ( 0.02)
Shiplapping depth: mm ( " ) 15 (9/16) 15 (9/16)
No load speed : min-1= rpm 9,000 9,000
Net weight : kg (lbs) 2.2 (4.8) 2.1 (4.6)
Repair P3/ 4
< 1 > Assembling bearing retainer 6-18
Face the convex part of bearing
retainer 6-18 to ball bearing 626LLB,
and assemble it together with ball
bearing 626LLB to drum holder
as illustrated in Fig.1 and Fig. 1A.
Drum holder
Bearing
retainer 6-18
Ball bearing 626LLB
Fig. 1 Convex part Fig.1A
< 2 > Assembling pulley 8-30 Bracket
Pulley may be loosened by the frequent
shock of electric brake, if it would be tightened Drum
not so firmly.
Tighten pulley with spanner 17 or
with adjustable spanner firmly.
The fastening torque required is approx..
over 2.0Nm.
Pulley 8-30
Fig. 2
< 3 > Assembling drum plate
Insert compression spring 3 into drum holes
before assembling drum plate to the drum.
Screw pan head screws M4 x 10 into drum
about one turn, and attach the drum plate Compression spring 3
so that the screw heads will be set into the
grooves on the drum plate.
Groove on
the drum plate
Hex socket head
Drum plate bolt M6x18
Drum plate
Pan head
screw M4x10
Fig. 3
Repair P4/4
< 4 > Press pulley 7.5-13.5 onto the motor shaft
with the dimension as shown in the Fig.4. Pan-head screw M3x8
Motor holder DC motor
Pulley 7.5-13.5
85.0 +0.2/0
Fig.4.
Circuit diagram
Red
Red circle mark
White (+)
(+)
Black
(-) Black
Black
(-)
Wiring diagram
Arrange lead wires in the main frame as shown below.
Fix lead wires
with lead holders.
Main frame
Fix lead wires with
lead holders.
Varnished Tetoron tube
Treat connector end as shown in the figure.