Text preview for : ar-162.pdf part of Sharp ar-162 Sharp Copiers AR162_163_201_206_207_F161_F201_S162_S201_S206 ar-162.pdf
Back to : ar-162.pdf | Home
PARTS GUIDE
C O D E :0 0 Z A R 1 6 2 //P 1 /
DIGITAL COPIER
AR-162 AR-163
AR-201 AR-206 AR-207
AR-F161 AR-F201
MODEL AR-S162 AR-S201 AR-S206
CONTENTS
1 (Exteriors) Q COPY- (COPY-Operation PWB)
2 (Operation panel section) R /P-out (Duplex/P-out sensor PWB)
3 (Side door unit) S MHPS (MHPS PWB)
4 2.3 (2nd,3rd mirror unit) T (Tray sensor PWB)
5 (Optical unit) U (Manual paper feeding sensor PWB)
6 (Middle frame unit) V PS (PS sensor PWB)
7 (Process unit) W (RCU PWB)
8 (DV cartridge unit) X (Low voltage power supply unit)
9 (Fusing unit) Y (Mother PWB) .. AR-F161,AR-F201
F (Main driving unit) Z LCD (LCD operation PWB)
G 1(Base plate unit 1) AR-F161,AR-F201
H 2(Base plate unit 2) [ FAX (FAX PWB unit) AR-F161,AR-F201
I \ TEL/LIU (TEL/LIU PWB unit) AR-F161,AR-F201
(Manual paper feeding multi unit) ] ERDH (ERDH OP PWB)
J (Delivery frame unit) ^ 1ST I/F PWB(1ST Tray interface PWB)
K TC (TC case unit) AR-201,AR-206,AR-207,AR-S201,AR-S206,
L 250 (250 sheets tray unit) AR-F161,AR-F201
M & _ (Dry heater PWB)
(Packing material & Accessories) . (Delivery interface PWB)
N 1ST ( 1ST Tray exteriors) a HP (Shifter HP sensor PWB)
AR-201,AR-206,AR-207,AR-S201, Except AR-162,AR-S162
AR-S206,AR-F161,AR-F201 b MHPS OC(MHPS PWB OC)
O 1ST (1ST Tray paper Except AR-162,AR-163,AR-S162
feeding unit) AR-201,AR-206,AR-207, c FAX OP (FAX OP PWB) AR-F161,AR-F201
AR-S201,AR-S206,AR-F161,AR-F201 (Index)
P MCU (MCU PWB)
[]
AR-207 (RSPF) AR-RP1 (ERDH ) AR-EB3 AR-F161/F201
(SPF) AR-SP2
[Note]
For the AR-207 duplex automatic document feeder(RSPF), refer to the AR-RP1 Parts Guide, for electronic sort PWB(ERDH PWB) the
AR-EB3 Parts Guide, and for the AR-F161/F201 automatic document feeder (SPF) the AR-SP2 Parts Guide.
This document has been published to be
SHARP CORPORATION used for after sales service only.
The contents are subject to change without
notice.
:
:
:
:
:
:
:
:
:
DEFINITION
The definition of each Rank is as follows and also noted in the list
A : Parts necessary to be stocked as High usage parts.
B : Parts necessary to be stocked as Standard usage parts.
C : Low usage parts.
D : Parts necessary for refurbish.
E : Unit parts recommended to be stocked for efficient after sales service.
Please note that the lead time for the said parts may be longer than normal parts.
S : Consumable parts.
Please note that the following parts used in Copier under the same description are classified into A or B Rank depending upon the place
used.
Example : Gear made of Metal, Sprocket, Bearing, Belt made of Rubber, Spring clutch mechanism.
A Rank : The parts which may be with the revolution or loading.
B Rank : Parts similar to A Rank parts, but are not included in Rank A.
!
Because parts marked with "! " is indispensable for the machine safety maintenance and operation, it must be replaced with the parts
specific to the product specification.
F
F Other than this Parts Guide, please refer to documents Service Manual (including Circuit Diagram) of this model.
F Please use the 13 digit code described in the right hand corner of front cover of the document, when you place an order.
F For U.S. only-Use order codes provided in advertising literature. Do not order from parts department.
1 (Exteriors)
PRICE RANK NEW PART
NO. PARTS CODE Ex. Ja. MARK RANK
DESCRIPTION
1 GCOVH0010QSZ1 BC GD D OC cover (AR-162,AR-163,AR-S162,AR-S201,AR-S206) OC
2 PSHEZ0058QSZZ AY FQ C OC sheet (AR-162,AR-163,AR-S162,AR-S201,AR-S206) OC
3 CHNG-0007QS01 AM EG C OC hinge (AR-162,AR-163,AR-S162,AR-S201,AR-S206) OC
4 XEBSE40P10000 AA DD C Screw (4