FAX C - KM2530_3530 - M Maintenance.pdf part of Kyocera FAX C - KM2530 3530 - M Maintenance FAX C - KM2530_3530 - M Maintenance.pdf, Kyocera Copiers KM2530_3530 FAX C - KM2530_3530

Text preview for : FAX C - KM2530_3530 - M Maintenance.pdf part of Kyocera FAX C - KM2530 3530 - M Maintenance Kyocera Copiers KM2530_3530 FAX C - KM2530_3530 - M Maintenance.pdf

Back to : FAX C - KM2530_3530 - M | Home

3CM

Maintenance
Description
item No.
U992 Checking or clearing the printer/fax count
Description
Displays, clears or changes the print count of the printer or fax when the printer board or facsimile kit is
installed.
Purpose
To check the condition of use of the printer or fax.
Method
Press the start key. The print count of the printer or fax is displayed.
Setting
1. Press the appropriate item.
2. Enter a six-digit numerical value using the numeric keys. To clear both of the printer and fax counts, press
the reset key.
3. Press the start key. The count is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.

1-3-39
3CM

Maintenance
Description
item No.
U894 Performing board test
Description
Performs tests on the SRAM, DRAM (image memory, bitmap memory) and optional memory on the fax control
PCB.
Purpose
Used to check if reading and writing are performed correctly in respective installed memories.
Start
1. Press the start key. The screen for selecting an item is displayed.
2. Press the appropriate item.
The test executes.
Display Description
BOARD MEMORY Performs tests on SRAM and DRAM.
BOARD OP. MEM Performs tests on optional memory.
Performing tests on SRAM and DRAM
1. Press the start key. The screen displays the test results as follows.