Text preview for : SB-2MH-0002-B413.pdf part of Kyocera SB-2MH-0002-B413 Kyocera Printer FS-1030MFP-1035MFP-1130-1135 SERVICEBULLETIN SB-2MH-0002-B413.pdf
Back to : SB-2MH-0002-B413.pdf | Home
(Page.1/1)
Service Bulletin Ref. No. 2MH-0002 (B413)
[Service Information] November 18, 2011
Subject Notes on Upgrade of the Firmware
Model FS-1030MFP, FS-1130MFP, FS-1035MFP, FS-1135MFP
Topic
Please restart the machine by completely disconnecting and reconnecting the power cord after firmware was
upgraded.
Reason
The LCD display remains lit and the power cannot be turned OFF even if the power switch was pressed
after firmware upgrade.
Therefore, it is necessary to disconnect and reconnect the power cord in order to turn the power OFF and
ON.
After the power cord was reconnected, the machine starts up and the LCD is lit.
Then, the machine will automatically enter in the [Ready] mode since it retains the previous status.
KMC's Classification Entire Stock Rework In-Field modification at next visit
In-Field modification by case No modification necessary
Field Measure: Please note the above.
KYOCERA MITA Europe B.V.
European Service & Development Center (ESDC)