Text preview for : RNT-008.pdf part of Riso RNT-008 . Rare and Ancient Equipment Riso TI RN RNT-008.pdf
Back to : RNT-008.pdf | Home
Page 1 of 1
RN SERIES TECHNICAL BULLETIN
Data Category Field Modification Trouble-Shooting General Information Safety Advice
DISTRIBUTED TO : All Distributors DATE : 6 April, 2001
RNT-005
MODEL : All "RN" models ISSUE
: RNT-008 Our Ref.: RNT-007
NO. HCI-108
Proceeding Grade Parts Compatibility Handling of Modified Parts
Action ASAP Compatible Free of Charge
Action as given below Conditionally Compatible Conditionally Chargeable
Action if required Not Compatible Chargeable
Refer in need Old Obsolete
SUBJECT: Assemby Instructions
Refer to Technical Bulletins
021-18117-207 Guide Tip; Master Loading
RNT-005
021-18201-208 Master Loading Sheet
RNT-007
021-18207-001 De-electricity Brush; Master Loading
021-18201-208 Master Loading Sheet
The three parts should be
021-18207-001 De-electricity Brush; Master Loading positioned in the order as shown
on the sketch on the left.
021-18117-207 Guide Tip; Master Loading
Align the side edge of the De-electricity
Fit the bottom edge of the De-electricity Brush
Brush on this engraved line.
in between the two engraved parallel lines.
Fit the top edge of the base portion of the Master Loading
Fit the side edge of the Master Loading Sheet in
Sheet in between the two engraved parallel lines.
between the two engraved parallel lines.
It is very important that the sponges are located in the center of the oval holes on the "Guide Tip;
Master Loading". Otherwise the sponges will not lift, and the master will jam on the sponges.
Issued By Overseas Technical Sec., Riso Kagaku Corp.