Text preview for : 58635-WW-1.pdf part of MAKITA 58635-WW-1 MAKITA 58635-WW-1.pdf
Back to : 58635-WW-1.pdf | Home
T ECHNICAL INFORMATION
Subject How to Set Leaf Spring 26 in Place When Assembling Chuck
58635
For Models HR2010, HR2410, HR2412, HR2413, HR2420
Country All countries
Description Described below is the correct way of setting Leaf Spring 26 (Part No.232190-3) in place
when assembling Chuck of the subject models in repairing.
If Leaf Spring 26 is wrongly set, you might lose the function of "Easy bit change by merely
turning chuck".
How to Set Leaf Spring 26 in Place in Assembling Chuck
Compression Spring 35
(Bit side) (Motor Housing side)
Leaf Spring 26 (Part No.232190-3)
hole
Item No.of Parts List
HR2010 : 084
HR2410 : 088
HR2412 : 008
HR2413 : 008
(Bit side) HR2420 : 087
As illustrated above , always set Leaf Spring 26 in place with its hole side facing the Bit side.
And also refer to the following magnified illustation of Correct way.
(All the machines are assembled certainly in this correct way in our factory.)
Correct Wrong
Compression Spring 35 (Motor Housing side) End face of
Compression Spring 35
hole
(Bit side)
Leaf Spring 26
End face of
hole Leaf Spring 26
If Chuck is assembled in the wrong way in repairing - with the hole side of Leaf Spring 26 facing the Motor Housing side,
the function of "Easy bit change by merely turning chuck" might be lost due to the interference between the end face of
Compression Spring 35 and that of Leaf Spring 26.