Text preview for : Samsung_LN40S81BD_LCD.part2.rar part of Samsung LN40S81BD LCD.part2 Samsung LCD TV LN40S81BD Samsung_LN40S81BD_LCD.part2.rar
Back to : Samsung_LN40S81BD_LCD.par | Home
3 Alignments and Adjustments
3 Alignments and Adjustments
3-1 General Alignment Instuction
1. Usually, a color LCD-TV needs only slight touch-up adjustment upon installation.
Check the basic characteristics such as height, horizontal and vertical sync.
2. Use the specified test equipment or its equivalent.
3. Correct impedance matching is essential.
4. Avoid overload. Excessive signal from a sweep generator might overload the front-end
of the TV. When inserting signal markers, do not allow the marker generator to distort test result.
5. Connect the TV only to an AC power source with voltage and frequency as specified on
the backcover nameplate.
6. Do not attempt to connect or disconnect any wire while the TV is turned on. Make sure
that the power cord is disconnected before replacing any parts.
7. To protect aganist shock hazard, use an isolation transformer.
3-1
3 Alignments and Adjustments
3-2 Factory Mode Adjustments
3-2-1 Entering Factory Mode
To enter 'Service Mode' Press the remote -control keys in this sequence :
- If you do not have Factory remote - control
Power OFF MUTE 1 8 2 Power On
3-2-2 How to Access Service Mode