Text preview for : 20030412100303000_4_adjustment.pdf part of Samsung 20030412100303000 4 adjustment Samsung LCD TV LW-15E23 20030412100303000_4_adjustment.pdf
Back to : 20030412100303000_4_adjus | Home
CONFIDENTIAL
4 Alignments and Adjustments
4-1 General Alignment Instruction
1. Usually, a color TV-VCR needs only slight touch-up adjustment upon installation.
Check the basic characteristics such as height, horizontal and vertical sync.
2. Use the specified test equipment or its equivalent.
3. Correct impedance matching is essential.
4. Avoid overload. Excessive signal from a sweep generator might overload the front-end
of the TV. When inserting signal markers, do not allow the marker generator to distort
test results.
5. Connect the TV only to an DC power source with voltage and frequency as specified on
the backcover nameplate.
6. Do not attempt to connect or disconnect any wire while the TV is turned on. Make sure
that the power cord is disconnected before replacing any parts.
7. To protect aganist shock hazard, use an isolation transformer.
LW15E23CB/LW17E24CB 4-1
4 Alignments and Adjustments
CONFIDENTIAL
4-2 Adjustment Instruction
4-2-1 Service Mode Screen
1. Adjustment RGB Contrast
RGB Bright
R Gain
G Gain
B Gain
FB Gain
2. Options Default : on
Help Osd : off
Suwon Ch Table
Spain Ch Table
Eeprom clear
3. Auto Color Auto color (PC)
Auto color (TV)
4. Reset
4-2-2 Service function
1. EEPROM Clear : Initially executed when replacing OTP.
2. TV Auto Color : Used to adjust TV image color.
3. PC Auto Color : Used to adjust PC image color.
4. Reset : Used after all adjustments.
5. Other functions shown are not service related.
4-2-3 Adjustment Sequence for ROM change only
EEPROM Clear TV auto color PC auto color RESET
(For ROM
change only)
4-2 LW15E23CB/LW17E24CB