Text preview for : DSP-AX1 & RX-V1 Âòîðàÿ Ñõåìà.pdf part of Yamaha DSP-AX1 & RX-V1 Âòîðàÿ Ñõåìà Yamaha DSP DSP-AX1 & RX-V1 DSP-AX1 & RX-V1 Âòîðàÿ Ñõåìà.pdf
Back to : DSP-AX1 & RX-V1 Âòîðàÿ Ñõ | Home
DSP-AX1/RX-V1
AV AMPLIFIER/AV RECEIVER
DSP-AX1/RX-V1
SERVICE MANUAL
IMPORTANT NOTICE
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.
WARNING: Failure to follow appropriate service and safety procedures when servicing this product may result in personal
injury, destruction of expensive components, and failure of the product to perform as specified. For these
reasons, we advise all YAMAHA product owners that any service required should be performed by an
authorized YAMAHA Retailer or the appointed service representative.
IMPORTANT: The presentation or sale of this manual to any individual or firm does not constitute authorization, certification
or recognition of any applicable technical capabilities, or establish a principle-agent relationship of any
form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and
service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore,
inevitable and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist,
please contact the distributor's Service Division.
WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this
buss).
IMPORTANT: Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the
unit.
DSP-AX1/RX-V1
s CONTENTS
TO SERVICE PERSONNEL ........................................... 1 TUNER ADJUSTMENTS ........................................ 34~37
FRONT PANELS ............................................................. 2 IC DATA .................................................................. 38~53
REAR PANELS ........................................................... 3~4 PRINTED CIRCUIT BOARD ................................... 54~83
SPECIFICATIONS ....................................................... 5~8 BLOCK DIAGRAM .................................................. 84~88
INTERNAL VIEW ............................................................ 9 PIN CONNECTION DIAGRAM ..................................... 89
DISASSEMBLY PROCEDURES .............................. 9~10 SCHEMATIC DIAGRAM ....................................... 90~101
SELF DIAGNOSIS FUNCTION ............................... 11~32 PARTS LIST ........................................................ 102~135
AMP ADJUSTMENTS ................................................... 33 REMOTE CONTROL TRANSMITTER ................ 136~141
100698
DSP-AX1/RX-V1
s TO SERVICE PERSONNEL
1. Critical Components Information.
Components having special characteristics are marked Z AC LEAKAGE
and must be replaced with parts having specifications equal WALL EQUIPMENT TESTER OR
to those originally installed. OUTLET UNDER TEST EQUIVALENT
2. Leakage Current Measurement (For 120V Models Only).
When service has been completed, it is imperative to verify
that all exposed conductive surfaces are properly insulated
from supply circuits.
INSULATING
TABLE
q Meter impedance should be equivalent to 1500 ohm shunted
by 0.15