Text preview for : MG1003SM.PDF part of TOSHIBA MG1003SM TOSHIBA Copiers 1550 1550_orig PDF MG1003SM.PDF
Back to : MG1003SM.PDF | Home
SERVICE MANUAL
SORTER MG-1003
Click the Page Only button to close the overview area of the window.
Click the Bookmarks and Page button to open the Contents and
display bookmarks created for the document. Click a bookmark's name
to go to the Page marked by that bookmark.
Click the Thumbnails and Page button to open the overview area and
display thumbnail images of each document page. Click a thumbnail to
go to the page marked by that thumbnail.
Copyright TOSHIBA CORPORATION 1995
ALL RIGHTS RESERVED
General Precautions for Installation/Servicing/Maintenance
1. When installing the Sorter MG-1003 to the Plain Paper Copier, be sure to follow the instructions
described in the "Unpacking/Set-Up Procedure for the MG-1003" booklet which comes with each
unit of the MG-1003.
2. The MG-1003 should be installed by an authorized/qualified person.
3. Before starting installation, servicing or maintenance work, be sure to unplug the copier first.
4. The MG-1003 is supplied with power from the copier.
5. Use suitable measuring instruments and tools.
6. When servicing or maintaining the MG-1003, be careful about the rotating or operating sections
such as gears, pulleys, sprockets, cams belts, etc.
7. When parts are disassembled, reassembly is basically the reverse of disassembly unless otherwise
noted in this manual or other related materials. Be careful not to assemble small parts such as
screws, washers, pins, E-rings, toothed washers to the wrong places.
8. Basically, the machine should not be operated with any parts removed or disassembled.
9. Delicate parts for preventing safety hazard problems (such as thermofuses, door switches, sensors,
etc. if any) should be handled/installed /adjusted correctly.
10. During servicing or maintenance work, be sure to check the serial No. plate and other cautionary
labels (if any) to see if they are clean and firmly fixed. If not, take appropriate actions.
11. For the recovery and disposal of used MG-1003s, consumable parts and packing materials, it is
recommended that the relevant regulations/rules should be followed.
How to lift the Sorter MG-1003
Be sure to hold the sorter in the positions as indicated in Fig. A.
Do NOT hold as in Fig. B.
Fig. A. Fig. B.
c Copyright 1995 TOSHIBA CORPRATION
1. PRODUCT SPECIFICATIONS
Model name .................................... MG-1003
Type ................................................ Suspended type
Paper transport method ................... Roller transporting
Paper sorting method ...................... Bin moving method
Acceptable paper
Mode Number of sets Number of Sheets Acceptable size of paper
Non-Sort 1 60 A3, LD, B4, LG, FOLIO, COMP
50~127g/m2
1 100 A4, LG, ST-R, A5-R, LT, B5, A4-R, LT-R,
B5-R 50~127g/m2
Sort 10 15/bin
A3, B4, LD, LG 50~127g/m2
Group 10 15/bin
Sort 10 30/bin A4, A4R, B5, B5R, A5R, LT, LTR, FLO,
Group 10 20/bin STR 50~127g/m2
Note: Special paper such as OHP, drawing paper, labels, etc. can be used only in the non-sort
mode.
Number of bins ........................... 1~10 (bin 1 doubles the non-sort bin)
Power source used .................... DC24V