Text preview for : 32.PDF part of Kyocera 32 Kyocera Copiers DC5090 SERVICE 32.PDF
Back to : 32.PDF | Home
367
3-2-1 Simulations
This copier is equipped with a simulation function which can be used to check the
operation and adjust electrical components.
( 1 ) Running a simulation
Start
Enter 10871087 with the numeric - - - - - - Entering the simulation mode.
keys.
The simulation mode is run, and ------ U00
"U00" will appear on the touch screen.
Enter the number of the simulation
to be executed with the numeric
keys or select the number of the - - - - - - Selecting a simulation No.
simulation to be executed with the (simulation function)
UP/DOWN keys.
The selected simulation number
and simulation name appears on
the touch screen.
Press the print key.
The simulation is run.
Press the stop/clear key.
Yes
Run again ?
No
Yes
Run another
simulation?
No
Enter "01" with the numeric keys
- - - - - - Exiting the simulation mode.
and press the print key.
End
3-2-1
367