Text preview for : 04-rh18-servtool.pdf part of NOKIA 04-rh18-servtool NOKIA Mobile Phone Nokia_1100 04-rh18-servtool.pdf
Back to : 04-rh18-servtool.pdf | Home
Customer Care Solutions
RH-12/36/38 Series Transceivers
Service tools
Issue 1 10/03 Nokia Corporation
RH-12/36/38 Company confidential
Service tools CCS Technical Documentation
[This page left intentionally blank]
Page 2 Nokia Corporation. Issue 1 10/03
Company confidential RH-12/36/
CCS Technical Documentation Service tools
Table of Contents
Page No
Service Tools.................................................................................................................. 5
Custom service tools ...................................................................................................... 5
Standard service tools ..................................................................................................7
Service Cables ............................................................................................................9
Issue 1 10/03 Nokia Corporation. Page 3
RH-12/36/38 Company confidential
Service tools CCS Technical Documentation
[This page left intentionally blank]
Page 4 Nokia Corporation. Issue 1 10/03
Company confidential RH-12/36/
CCS Technical Documentation Service tools
Service Tools
Custom service tools
Product Service Tool Product Code Photo Description Info
DA-10 Docking Station 0770749 The Docking Station
Adapter Adapter, together with a
Docking Station, is used
for analysis of Mbus,
Fbus, RF, and audio con-
nections.
MJ-15 Module Jig 0770739 This jig allows phone
PWB-level service and
troubleshooting. Compo-
nents must be protected
against over-voltage and
over-current.
RJ-12 Soldering Jig 0770740 Used for soldering and as
a rework jig for system
module.
SA-41 RF Adapter 0770767 Enables RF connection
with DA-10
SF-10 POS Flash Adapter 0770748 The flash adapter allows
FBUS/MBUS connections
for flashing.
ST-10 Rework stencil for PA 0770741
Issue 1 10/03 Nokia Corporation. Page 5
RH-12/36/38 Company confidential
Service tools CCS Technical Documentation
Standard service tools
Product Service Tool Product Code Photo Description Info
ACF-8 Universal Power Sup- 0680032 ACF-8 is used to power
ply FPS-8 and FLS-4S. ACF-8
has 6 Vdc and 2.1A out-
put.
FLS-4S POS Flash Adapter 0080543 The Point of Sale (POS)
(Americas) flash is a low-cost soft-
0080542 ware upgrade tool. This
(APAC) requires the XCS-1 cable
0080541 and ACP-8U for opera-
(Europe/Africa) tion.
FPS-8 Flash Prommer 0080321 The Flash Prommer FPS-8
is used for heavy flash.
JBV-1 Docking Station 0770298 The Docking Station and
the Docking Station
Adapter are needed for
Mbus, Fbus, RF, and audio
connections.
This setup allows connec-
tion between flash prom-
mers. When the audio box
is connected, it has to be
connected to the phone's
audio connector. The
Docking Station can be
powered by FPS-8 or
external power supply.
Page 6 Nokia Corporation. Issue 1 10/03
Company confidential RH-12/36/
CCS Technical Documentation Service tools
PKD-1 SW Security Device 0750018 SW security device PKD-1
is hardware device that,
when connected to the
parallel (LPT) port of the
PC, enables the use of the
service software. With-
out the dongle present, it
is not possible to use the
service software. Printers
or other peripheral
devices can be connected
to the PC through the
dongle, if needed.
Caution: Make sure that
you have switched off the
PC and the printer before
making connections!
Caution: Do not connect
the PKD-1 to the serial
port. You may damage
your PKD-1!
Issue 1 10/03 Nokia Corporation. Page 7
RH-12/36/38 Company confidential
Service tools CCS Technical Documentation
Service Cables
Product Service Tool Product Code Photo Description Info
DAU-9S MBUS Cable 0730108 The MBUS cable DAU-9S
has a modular connector
and is used between PC
serial port and, for exam-
ple, the MJS-37.
FLC-2 DC Cable 0730185 FLC-2 is used to supply a
controlled operating volt-
age.
PCS-1 Power Cable 0730012 The Power Cable PCS-1 is
used to connect the serv-
ice tools (JBV-1, MJS-57)
to an external power sup-
ply.
SCB-3 Docking Station Cable 0730114 The DC cable SCB-3 is
used to connect the serv-
ice power supply to the
charger connection.
Page 8 Nokia Corporation. Issue 1 10/03
Company confidential RH-12/36/
CCS Technical Documentation Service tools
XCS-1 Service Cable 0730218 The XCS-1 Service Cable
is used to connect FLS-4
to FLA-23.
XCS-4 Modular Cable 0730178 View of XCS-4
XCS-4 is a shielded cable
(one specially shielded
conductor) modular cable
for flashing and service
purposes.
Issue 1 10/03 Nokia Corporation. Page 9
RH-12/36/38 Company confidential
Service tools CCS Technical Documentation
[This page left intentionally blank]
Page 10 Nokia Corporation. Issue 1 10/03