Text preview for : SB-2LZ-0005-B100.pdf part of Kyocera SB-2LZ-0005-B100 Kyocera Printer FS-1120-1320-1370 SERVICEBULLETINS SB-2LZ-0005-B100.pdf
Back to : SB-2LZ-0005-B100.pdf | Home
(Page.1/2)
Service Bulletin Ref. No. 2LZ-0005(B100)
April 14, 2011
Upgrade of the System Firmware (Ver.004.001)
Subject
FS-1120D_FS-1320D_04.00.0010_(2011-01-07)
Model FS-1120D, FS-1320D
Topic
The system firmware was upgraded as follows.
Content of Changes
No. Item Details CTL No. FW
1 Change of the Digital The term used on the service status page was changed from "Digital Dot 527894 MAIN
Dot Coverage Coverage" to "Print Coverage".
display on the status - The coverage is simply converted with the area image ratio based on the
page current dot number data so that the accuracy as the reference value of the
toner consumption can be improved.
Precaution)
- When upgrading the firmware, the Digital Dot Coverage data will be reset
due to the different way of calculation.
If you need old print coverage report, please print out Service Status Page
before updating the firmware.
2 Measure against the KPDL error (Undefined) might occur with a certain PDF data. Therefore, this 505177 MAIN
TP-080086
error with a certain was corrected. #494191
PDF data printing
3 Measure against the (check box) was not printed and the printing position of X (cross mark) 521003 MAIN
TP-080049
print failure with a was also shifted with a certain data. Therefore, this was corrected.
certain data
4 Measure against Images were partially overlapped with a certain PDF data. Therefore, this 505183 MAIN
TP-080006
the images was corrected. #335955
overlapping failure
5 Measure against the Letters were partially garbled depending on the output size with a certain 510581 MAIN
TP-080104,
garbled letters with CAD file. Therefore, this was corrected. #560940
a certain CAD file
6 Measure against the Image might be disordered and KPDL error occurred when printing a certain 510509 MAIN
TP-090384
disordered image PDF file. Therefore, this was corrected.
with a certain PDF
file
7 Measure against the The left edge of image dropped out and character pitch got too wide in PS 510368 MAIN
TP-090331
image dropout in data output. Therefore, this was corrected. ID_#404979
the PS output
KYOCERA MITA Europe B.V.
European Service & Development Center (ESDC)
(Page.2/2)
Service Bulletin Ref. No. 2LZ-0005(B100)
April 14, 2011
Program No. Check SUM Ver. Status Date Current Ver. Remark
New upgrade
MAIN 2LZ_3000004001 BD97 004.001 2011/1/7 003.002 FS-1320D
FS-1120D
ENGINE 2LZ_1000004001 4b10 004.001 2010/11/26 - FS-1320D
ENGINE 2LY_1000004001 106f 003.001 - - FS-1120D
For the KM sales companies, it is possible to download the firmware at the download center on the ESDC.net.
When upgrading the firmware or replacing a board, please upgrade each kind of the firmware to the latest version at the same
time.
Field Measure: Please upgrade the firmware when the problem described above arises.
Serial Nos. of the Affected Machines: To be informed later
KYOCERA MITA Europe B.V.
European Service & Development Center (ESDC)