Text preview for : 46217B-ww-1.pdf part of MAKITA 46217B-ww-1 MAKITA 46217B-ww-1.pdf
Back to : 46217B-ww-1.pdf | Home
T ECHNICAL INFORMATION 46217
Subject Change on rubber ring 26, etc.
For Models 1805B, 1806B (Power Planer), 4110B, 4110C (Angle Cutter)
Description 1. The rubber ring 26 will be changed in material and shape as follows.
And a ring will be added to the rubber ring 26 as shown in the figure below.
Current New
Material Chloropren Nitrile
Shape Without lip With lip
2. The insulation washer will be changed in shape as shown in the figure below.
3. For 4110B and 4110C only
The rubber pin 4 (a constituent part of motor housing) will be discontinued.
Current New
Rubber ring 26
Insulation washer Insulation washer Rubber ring 26 with lip
Rubber pin 4 Ring will be added to
Armature shaft Armature shaft rubber ring 26
Interchangeability(I/C)
Item No. Current part Q'ty I/C New part Q'ty Note
Rubber ring 26 1 => Rubber ring 26
64 1
421417-8 421490-8
22
Insulation washer 1 <= Insulation washer 1
681624-7 681635-2
Motor housing 1 Motor housing 1
65 No For 4110B and 4110C
156738-6 159687-6
Note
1. Interchangeability mark:
* => mark indicates that the current type part can be substituted for the new type part.
* <= mark indicates that the new type part can be suvstituted for the current type part.
2. For 1805B and 1806B only
* The current type parts (rubber ring 26 and insulation washer) and the new type parts are interchangeable as a set.
3. For 4110B and 4110C only
* The current type parts (rubber ring 26, insulation washer and motor housing) and the new type parts are interchangeable
as a set.
* The new type rubber ring 26 can fit into the current type motor housing if you remove the rubber pin 4 from the motor
housing and use the new type unsulation washer.
Implementation
1805B: From serial No. 53201E 1806B: From serial No. 25719E
4110B: From the next order 4110C: From serial No. 10122E