Text preview for : 6703D-TE.pdf part of MAKITA 6703D-TE MAKITA 6703D-TE.pdf
Back to : 6703D-TE.pdf | Home
T ECHNICAL INFORMATION
Models No. 6703D
New Tool
Description Cordless Screwdriver
CONCEPTION AND MAIN APPLICATIONS
Model 6703D is a straight version of the existing
Model 6702D (Cordless Angle Socket Driver). It is
equipped with quick-sleeve system for easy 45m 58m
m(1 m(2
-3/4 -1/4
installation/removal of bit. ") ")
97mm(3-13/16")
This tool is ideal for work which requires accurate,
uniform-torque fastening of machine screws and nuts.
Model 6703D is sold with a battery 9100 but
without a fast charger.
(Note)
Model 6703D for some countries and areas is sold without 333mm(13-1/8")
a battery cartridge and a fast charger.
Consult Makita Japan on this matter.
Main differences between Model 6703D and 6702D are as follows.
Model 6703D 6702D
Tool type Straight type Angle type
Quick-sleeve system for 6.35 mm
Bit or socket installation (1/4") hex shank bit 9.5 mm(3/8") square drivesystem
Stepless 5 - 37 kg.cm Five stages of 20 - 80 kg. cm
Torque adjust- ment
(0.4 -2.7 ft. lbs) (1.4 - 5.8 ft.lbs)
Specifications
DC Magnet Motor (9.6 V)
Capacities Nut/Machine Screw 3 mm - 5 mm (1/8" - 3/16")
Torque 5 kg. cm - 37 kg. cm (0.4 ft. lbs - 2.7 ft.lbs)
Driving Shank 6.35 mm (1/4") Hex
No Load Speed 400 rpm
Overall Length 333 mm (13-1/8")
Net Weight 1.3 kg (2.9 lbs)
Standard equipment
Battery 9100
Optional accessories
Phillips Bits, Slotted Bits, Socket Bits, Battery 9100, 9101,
Fast Charger DC9700, DC9015, DC9112, DC1201, Plastic Carrying Case
Features and benefits
1. As the tool is switched off automatically and the electric brake stops
the motor immediately after the clutch cuts in,
A) More precise torque can be obtained.
B) Less waste of battery energy
C) Relatively quiet operation because of no clutch slippage
D) No toruqe reduction caused by clutch wear
2. Refer to the attached sheets for more information.
The standard equipment for the tools shown may differ form country to country
Capacity
(1) The fastening torque can be adjusted within the range of 5 kgf-cm-35 kgf-cm in non-step.
Position of
torque change ring Fastening torque
1 5kg. cm(0.4ft. lbs.)
2 10kg. cm(0.7ft. lbs.)
3 18kg. cm(1.3ft. lbs.)
4 27kg. cm(2.0ft.lbs.)
5 37kg. cm(2.7ft.lbs.)
Note) The fastening torque shown on the table above are only for reference.
Since the fastening torque may vary depending on the type of
screw and the material of work to be fastened, check the fastening Working condition
torque before starting the work. Small screw : M5 x 14 mm
(2) Working volume per battery(reference values)
About 700 pieces (Position of fastening torque change ring : 5)
Steel plate with
13 mm in thickness
Quick-sleeve system : Just pull
out the sleeve and slip the bit in. Reversing switch for easy screw/nut removal
Release the sleeve to secure the bit.
Slim body/handle for easy gripping
9.0
6.35 (1/4")
Stepless adjustment clutch