Text preview for : JS1660-TE.pdf part of MAKITA JS1660-TE MAKITA JS1660-TE.pdf
Back to : JS1660-TE.pdf | Home
T ECHNICAL INFORMATION New Tool
Models No. JS1660
Description MAKITA 1.6 mm Straight shear
CONCEPTION AND MAIN APPLICATIONS 72
This is the model-changed version of the JS1650, wherein the
step difference is made on the side blade to minimize the
contact range between the cutting material and the side blade,
80
thereby the cutting material cannot be damaged so easily. Other 304
features are same as JS1650.
Specifications
Consumed Rated
Voltage(V) Current(A) Cycle (Hz) Max. output(W)
power(W) output(W)
100 2.7 50/60 260 145 280
115 2.3 50/60 260 145 280
200 1.4 50/60 260 145 280
220 1.2 50/60 260 145 280
230 1.2 50/60 260 145 280
240 1.1 50/60 260 145 280
No Load Speed No. of striking 4500/min
Max. cutting plate Soft steel plate 1.6mm
thickness(mm) Stainless plate 1.2mm
Net Weight 1.4kg
Cord length(m) 2.5m
Standard equipment
Hex. wrench 3
Wrench holder
Thickness gauge
Optional accessories
Side blade R
Side blade L
Center blade
Features and benefits
1. The step difference made on the side blade will minimize the contact
range(see ''a'' shown on right figure)between the cutting material and the
side blade, thereby the cutting material cannot be damaged so
easily.(Other features shown below are same as JS1650.)The shape of a a
side blade (JS1650) (JS1660)
2. The both blades cutting system may not deform the plate after cutting unlike the one blade type shear.
3. The cutting chips can be discharged only in one direction, thereby enabling high working efficiency in safety.
4. The edge of the machine is well designed so that the cutting section can be easily seen.
5. The C-type channel can be cut.
6. The burr production can be minimized through adjusting the clearance between blades depending on the plate
thickness.
7. The slide type switch is mounted on the center of the machine so that it can be handled by whichever hand of left
or right hand.
8. The light weight(1.4 kg) enables to operate for a long time.
The standard equipment for the tools shown may differ form country to country.
Capacity
(1) Thickness of the cutting material and the (2) Thickness of the cutting material and
(m/min.) cutting speed (A) the load current value(in 100V)
9
3.0
8
Soft steel plate
7
Cutting speed
Stainless plate Soft steel plate
Current
Stainless plate
6 2.0
5
4
1.0
0
0.5 1.0 1.5 0.5 1.0 1.5
1.2 1.6 (mm) 1.2 1.6 (mm)
Thickness of cutting material Thickness of cutting material
Repair
Same as JS1650.