Text preview for : 03-dtx-3-systm5.pdf part of NOKIA 03-dtx-3-systm5 NOKIA Mobile Phone 32 03-dtx-3-systm5.pdf
Back to : 03-dtx-3-systm5.pdf | Home
Customer Care Solutions
DTX-3 Series Transceivers
Modules
Issue 1 4/03 Nokia Mobile Phones Ltd.
DTX-3
Modules CCS Technical Documentation
Table of Contents
Page No
Glossary of Terms ..........................................................................................................3
Functional Description of DTX-3 ..................................................................................5
Circuit Description .......................................................................................................5
Interfaces and Connectors ............................................................................................5
Nokia 32 LED Indicators ...............................................................................................6
LED Indicator status: ...................................................................................................7
Signal tones ..................................................................................................................8
Key Sequences ..........................................................................................................8
Page 2 Nokia Mobile Phones Ltd. Issue 1 4/03
DTX-3
CCS Technical Documentation Modules
Glossary of Terms
ACCIf Accessory Interface block of MAD2WD1
AIF Application Interface
ASIC Application Specific Integrated Circuit
BB Baseband
CCONT Power management IC for digital phones
CIS PCMCIA Card Information Structure
COBBA_GJP DCT3 RF-interface and audio codec ASIC
with serial MAD interface
CSP Chip Scale Package
DB Dual band
DCS1800 Digital Cellular system at 1800 MHz
DCT3 Digital Core Technology, 3rd generation
DSP Digital Signal Processor
EMC Electromagnetic compatibility
EMI Electromagnetic Interference
FBUS Asynchronous Full Duplex Serial Bus
GSM Global System for Mobile communications
HSCSD High Speed Circuit Switched Data
MBUS 1-wire half duplex serial bus
MCU Micro Controller Unit
MDI MCU-DSP Interface
MAD MCU+ASIC+DSP asic, common name for whole family
MAD2PR1 Modified MAD2 asic, pin count 144 instead of 176
MAD2WD1 MCU+ASIC+DSP with HSCSD specific changes
Issue 1 4/03 Nokia Mobile Phones Ltd. Page 3
DTX-3
Modules CCS Technical Documentation
PA Transmit Power Amplifier
PBX Private Branch Exchange
PC Personal Computer
PWB Printed Wiring Board
PCM Pulse Code Modulation
PCM SIO Synchronous serial bus for PCM audio transferring
PCMCIA PC Memory Card International Association
PSTN Public Switched Telephone Network
RF Radio Frequency
SIM Subscriber Identity Module
SMART PCMCIA interface ASIC
Sulo PCMCIA interface ASIC for RPM-3
UI User Interface
VCXO Voltage Controlled Crystal Oscillator
VCTCXO Voltage Controlled Temperature Compensated
Crystal Oscillator.
Page 4 Nokia Mobile Phones Ltd. Issue 1 4/03
DTX-3
CCS Technical Documentation Modules
Functional Description of DTX-3
Circuit Description
The DTX-3 application module connects the TME-3/TME-4 with the fixed telephone net-
work and/or with any unmanned connection, e.g. telemetry, remote control, security sys-
tems, remote data retrieval.
The Data module baseband blocks provide the MCU, DSP, external memory interface and
digital control functions in the UPP ASIC . Power supply circuitry, charging, audio pro-
cessing and RF control hardware are in the UEM ASIC.
The purpose of the RF block is to receive and demodulate the radio frequency signal from
the base station and to transmit a modulated RF signal to the base station.
Product and Module List
Material
Name of module Type code Notes
code
Application module DTX-3 0630596
Transceiver TME-3 0600344
Assembly parts A-cover 9458825 Assembly parts must be ordered as separate spare
B-cover 9458911 parts
Transceiver TME-4 0600342
Interfaces and Connectors
Telephone interface /PBX Trunk interface:
Signals Value
High Impedance Mode 50V
Ringing Voltage 70VAC
Line Impedance 600
Telephone interface /PBX Extension interface:
Signals Value
Off-Hook AC impedance 600
On-Hook AC impedance 150k
On-Hook DC resistance 10M
Loop DC current Min. 15 mA, max. 120mA
Issue 1 4/03 Nokia Mobile Phones Ltd. Page 5
DTX-3
Modules CCS Technical Documentation
Connector Name
RJ-11 Trunk/Extension Connector
M2M System Connector
RS232 connector
Power connector
Antenna connector
RJ-11 Trunk/Extension Connectors
This interface is a standard analog 2-wire interface for analog PBX trunk or analog land-
line telephone, or for analog PBX extension.
M2M System Connector
Custom pin header 2x25 for connection between GSM and PBX Application module.
RS 232 Data Connector
D9 female connector for standard level RS 232 data.
Power Supply Connector
Connector for ACW-5B power supply.
Antenna connector
TME-3 external antenna connector.
Nokia 32 LED Indicators
TME-3 comprises three indicator LEDs:
Figure 1: Indicator LEDs
Page 6 Nokia Mobile Phones Ltd. Issue 1 4/03
DTX-3
CCS Technical Documentation Modules
LED Indicator status:
Table 1: Nokia 32 LED indicator status during start-up
LED 1 LED 2 LED 3 D e s c r ip tio n
- - - P o w e r o ff
G re e n s c a n G re e n s c a n G re e n s c a n P o w e r o n , c o n n e c tin g to n e tw o r k
- R e d b lin k - P IN q u e r y / n e w P IN q u e ry
- R e d b lin k R e d b lin k P U K q u e ry
In t e n s it y o f F ie ld S t r e n g t h
R e d b lin k - - <- 105 dBm
U n a c c e p ta b le
G r e e n b lin k - - -1 0 5 ... -1 0 0
dBm
G re e n -1 0 0 ... -9 5
W eak
dBm
G re e n G r e e n b lin k -9 5 ... -9 0 d B m
G re e n G re e n -9 0 ... -8 5 d B m
M o d e r a te
G re e n G re e n G r e e n b lin k -8 5 ... -8 0 d B m
G re e n G re e n G re e n G ood > -8 0 d B m
Table 2: Nokia 32 LED indicator status during normal operation
LED 1 LED 2 LED 3 Description
Green Green In service, trunk mode
Green Green In service, extension mode
* * Green blink Call on
* * Green blink Incoming call
* * Green/Red blink Message received/ Voice mail in box
* * Red blink Message storage full
*) Led state due to current mode (trunk/extension) of the Nokia 32 terminal
Table 3: Nokia 32 LED indicator status in special situations
LED 1 LED 2 LED 3 Description
Green/Red blink Green/Red blink Green/Red blink Insert SIM card
Red blink Red blink Red blink Failure, contact service
Yellow Yellow Yellow Initialising
"SMS message received" signal will be resetted by off-hook, which also clears the mes-
sage from the message box.
Issue 1 4/03 Nokia Mobile Phones Ltd. Page 7
DTX-3
Modules CCS Technical Documentation
Signal tones
Tone sequence Description
------------------ Insert SIM card
-__ -__ -__ Enter PIN code
_ _ _________ ___________ Enter PUK code
- - - - Error tone ()
_________ _________ Ok
-- -- -- -- -- -- SMS received
Key Sequences
These sequences have to be entered using a normal landline telephone set connected to
the trunk connector of Nokia 32
Page 8 Nokia Mobile Phones Ltd. Issue 1 4/03
DTX-3
CCS Technical Documentation Modules
Table 4: Nokia 32 button sequences used in trunk mode.
Sequence Functionality Response
PIN# PIN code input Tone
PUK# PUK code input Tone
0**value Volume control, louder. `Value' from 1 to 10. Tone
555**# System reset Tone
CONFIGURATION STATE
**####** Configuration state Tone / Light indication
Acces code query state PIN Query tone and light
1234# Acces code enter. Default acces code. Acces code can Tone / Light indication
be changed or query can be disabled
2**XXXX# XXXX = interruption time in milliseconds. XXXX= 0 = Tone / Light indication
LI disabled. Default 400ms. Back to configuration
state
3**XXXX# XXXX = Reversal time in milliseconds Tone / Light indication
(999 => polarity reversed whole call time)
4# Entry code to CLI mode changing Query state flashing
4**XXX# XXX= Tone / Light indication
000 = ETSI FSK (default)
001 = DTMF
010 = DTMF_DK
111 = None
5# Entry code to operator selection. If roaming user can Query state flashing
select the operator entering operator code. If 000
operator will be selected automatically.
5**XXX# XXX = operator number Network searching. Tone and
light indication about the
000 = default (automatic selection) succes.
5# Entry code to ...
444*OLD PIN*NEW PIN# Change PIN code Tone / Light indication
888*OPERATOR CODE# Change Operator if roaming Tone / Light indication
Issue 1 4/03 Nokia Mobile Phones Ltd. Page 9
DTX-3
Modules CCS Technical Documentation
[ This page intentionally left blank. ]
Page 10 Nokia Mobile Phones Ltd. Issue 1 4/03