Text preview for : 9901-TE.pdf part of MAKITA 9901-TE MAKITA 9901-TE.pdf
Back to : 9901-TE.pdf | Home
T ECHNICAL INFORMATION
Models No. 9901
New Tool
Description MAKITA 76 mm Belt sander
CONCEPT AND MAIN APPLICATIONS
This machine has been developed, considering the safety, well
133
balancing and low cost, according to the request from overseas.
The sanding shoe for grinding the flat face and the belt sander
stand for grinding the small articles are provided as the optional
accessories.
The color of the M992 housing is the light green changed from
the green for the 9901. This machine is for export purpose so 148
far. The red color housing is used for exporting to the U.S.
328
Specifications
Frequency(Hz) Continuous rating
Voltage (V) Current (A) Max. Output(W)
Input(W) Output(W)
100 7.7 50/60 740 330 610
115 6.7 50/60 740 330 610
200 3.9 50/60 740 330 610
220 3.5 50/60 740 330 610
230 3.3 50/60 740 330 610
240 3.2 50/60 740 330 610
Belt speed 380 m/min
Belt size 76 mm x 533 mm(3" x 21")
Sanding area 76 mm x 110 mm,
Net weight 3.5 kg
Power supply cord 2m
Standard equipment
Sanding belt AA 40, 60, 80, 120 --- One piece for each (only domestic)
Optional accessories
Sanding belt AA 40, 60, 80, 100, 120, 150, 180, 240 (For steel and wood)
Sanding belt CC 40, 60, 80, 100, 120, 150, 180, 240 (For resin and stone material)
Belt sander stand (See page 2/3.) Sanding shoe assembly (See page 3/3.)
Features and benefits
Features :
1. The minimized decentering between the machine gravity center and the center of sanding belt enables the
stable working.
2. With the improved dust collecting capacity, the dust of 80 - 85% of the total grinding amount can be
absorbed.
3. With the flash side structure, even the wall side can be ground.
4. The fingers are protected from being caught in by the shielding covering the roller and the movable point of
the sanding belt.
The standard equipment for the tools shown may differ form country to country
Pulley 10-22.1(L)
Repair
Cautions in assembling
Fastening of the pulley
a) Fasten the pulley 10-22.1(L) before assembling the motor housing
R.(Figure 1)
(Left-hand screw)
Motor housing L
Motor housing R
Figure 1
b) Use the lock nut wrench *20 to fasten the pulley 38.3 while holding the Pulley 10-38.3
shaft of driving roller using the spanner 13. Strongly fasten it.
*: The lock nut wrench 20 is the accessory for 100 mm Disk grinder.
Lock nut wrench 20 Spanner 13
Figure 2