Text preview for : 2012-TE.pdf part of MAKITA 2012-TE MAKITA 2012-TE.pdf
Back to : 2012-TE.pdf | Home
T ECHNICAL INFORMATION New Tool
For Models 2012
Description 304mm(12") Planer
CONCEPTION AND MAIN APPLICATIONS
*Only 24kg(52.8lbs), one man can carry it.
430
*Just fit set plate into drum groove when changing knives.
*Superb surfacing to uniform stock thicknesses.
595
(277 with the
table folded)
438
Specifications
Continuous Rating
Voltage (V) Current(A) Cycle(Hz) Max. output(W)
Input (W) Output (W)
100 14 50/60 1330 980 1200
115 12 50/60 1330 980 1200
200 7 50/60 1330 980 1200
220 6.4 50/60 1330 980 1200
230 6.1 50/60 1330 980 1200
240 5.8 50/60 1330 980 1200
No load speed Drum speed: 8000/min., Feed speed: 8m/min
Driving shank (LxWxH) Plane blade width: 306mm (disposable blade)
Max. planing width 304mm
Planing depth 0 to 2.5mm
Material thickness 3 to 155mm
Net weight 24kg
Power supply cord 2.5m
Standard equipment
Socket wrench ---------- 1 Wrench ------------------ 1
Hex. wrench ------------ 1 Magnetic holders ------- 2
Optional accesories
Planer blade 306, stand, hood set (dust catcher #410 for woodwork)
Features and benefits
1. Double-edged disposable blade eliminates cut-off(grinding) work.
2. No need to adjust a blade height, because the blade can be replaced by inserting a set plate into the groove on plane
cylinder.
3. 24.0kg light weight and easy to carry even by one person
4. Support table can be folded in the cases of storage and carrying.
5. Stainless surface plate is hardly rusted and does not soil surface of material.
6. Optional accessories such as hood set and dust catcher (for woodwork #419)
prevents cut chips from spattering and clean work space is assured.
Capacity
1. Max. planing width: 304mm
2. Max. planing depth: under 150mm width; 2.5mm
150 to 240mm width; 1.5mm
240 to 304mm width; 1.0mm
3. Material thickness: 3 to 155mm
4. Comparison
(1) Planing test at power 100V
Model Makita2012
Planing Current / Feed spee
Material width depth d Current Feed speed
300mm 1mm 15A 4.6m/min
1mm 13A 4.8m/min
240mm
1.5mm 16A 4.1m/min
1mm 11A 5.7m/min
150mm 1.5mm 12.5A 5.1m/min
2.5mm 16A 4.4m/min
(Note) *Although planing depth is printed as 0 to 2.5mm in catalogs, etc., actual dimension is 0 to 2mm.
(2) Step on the material Step
Material
Model Makita 2012
Thickness of the step (mm) 0.07
(Note) *Dimensions differ depending on size and weight of the material. (Sample material:150W x 500L mm and
2kg weight) For a long and heavy material, support it with hands at the beginning and ending of the planing,
and the thickness nearly to the above dimensions can be gained.
Repair Field lead wire
Boss
Motor housing
1. Replacement of armature field
(1) Before replacement, take apart motor unit. Remove
four hex. socket bolts which secures motor unit at
thelower side of the main frame (feed roller side).
(Same procedure as for 2030N, however roller does Gear
housing
not have to be removed.)
(2) Armature can be pulled out without removing V
pulley. After replacing armature,fasten V pulley
securely. (V pulley uses a left-handed screw.) Gear housing
cover
(3) Pass field lead wire under the boss as shown in figure
1.
Figure 1
(4) Use a scale and position the motor unit so that motor
shaft and drum shaft should be parallelas shown in
figure 2. Pulley
at drum
side
There should be
no clearance
Scale
Motor
housing
Pulley at
motor side
Contact it Figure 2
2. Replacement of drum
(1) Remove plane blade and set plate, and pull out drum from main frame.
(2) Bearing box should be mounted on the main frame so that it's rubber pin faces upper side.