Text preview for : TVCR1delta_dfu_14PV210_user_manual.rar part of Philips TVCR1delta dfu 14PV210 user manual Philips TV-VCR TVCR1delta_dfu_14PV210_user_manual.rar



Back to : TVCR1delta_dfu_14PV210_us | Home

CONTENTS

1. CONNECTING YOUR TV-VIDEO COMBI . . . . . . . . . . . . . . 4 Continuous playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Connecting the cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Switch off function (SLEEP TIMER) . . . . . . . . . . . . . . . . . 21
Connecting a decoder or other equipment . . . . . . . . . . . . 4 Switch on function (WAKE-UP TIMER) . . . . . . . . . . . . . . 21

2. INSTALLING YOUR TV-VIDEO COMBI . . . . . . . . . . . . . . . . 5 9. Before you call an engineer . . . . . . . . . . . . . . . . . . . . . . . 22
Initial installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Technical terms used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Allocating a decoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Manual TV channel search . . . . . . . . . . . . . . . . . . . . . . . . . 6
Satellite receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Special installation functions . . . . . . . . . . . . . . . . . . . . . . . 7
Automatic TV channel search . . . . . . . . . . . . . . . . . . . . . . 7
Channel Number Allocation . . . . . . . . . . . . . . . . . . . . . . . . 7
Delete a TV Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Setting the language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Setting the time and date . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3. IMPORTANT NOTES FOR OPERATION . . . . . . . . . . . . . . 10
SUMMARY OF USER GUIDE . . . . . . . . . . . . . . . . . . . . . . . 10
User guide (OSD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

4. TV SET FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Selecting a TV programme . . . . . . . . . . . . . . . . . . . . . . . . 11
Automatic volume control (AVL) . . . . . . . . . . . . . . . . . . . . 11

5. PLAYBACK FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Playing a cassette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Playing NTSC cassettes . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Tape position indication . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Searching for tape position with the picture (picture
search) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Still picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Searching for tape position without the picture (wind
and rewind) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Instant View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Automatic search for a tape position (index search) . . 12
Picture interference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Cleaning the video heads . . . . . . . . . . . . . . . . . . . . . . . . . 13

6. MANUAL RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Recording without automatic switch-off . . . . . . . . . . . . 14
Recording with automatic switch-off (OTR
one-touch-recording) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Protecting your recordings . . . . . . . . . . . . . . . . . . . . . . . . 14
Auto-assembling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

7. PROGRAMMED RECORDING (TIMER) . . . . . . . . . . . . . . . 16
'VPS' (Video Programming System) and 'PDC'
(Programme Delivery Control) . . . . . . . . . . . . . . . . . . . . . 16
Programming a recording (with 'VIDEOplus') . . . . . . . . 16
Programming a recording (without 'VIDEOPlus') . . . . . 17
How to check or change a TIMER . . . . . . . . . . . . . . . . . . 18

8. ADDITIONAL FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . 19
How to read TELETEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Parental control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Switching the On-screen display (OSD) on or off . . . . . 20


3
&
OPERATING INSTRUCTIONS IN BRIEF

I Forward wind: During STOP and STANDBY: forward wind, during PLAYBACK:
The remote control forward scanning
INDEX E Index search: In combination with H / I : to search for previous/next
TELETEXT e TELETEXT: To switch TELETEXT on or off
recording on the cassette.
STANDBY m Switch off : To switch off set, interrupt menu
RECORD/OTR n Record: To record the programme selected
function, interrupt a programmed recording
(TIMER) STILL R Still picture: To stop the tape and show a still picture
0-9 Number buttons: 0 - 9
Coloured TELETEXT-buttons: To select TELETEXT pages directly
CLEAR Delete: To delete last entry or clear
programmed recording (TIMER) (red) Select page/chapter shown in red at the bottom of the screen
TIMER k TIMER: To make a manual TIMER (green) Select page/chapter shown in green at the bottom of the screen
programming or to alter or clear a
(yellow) Select page/chapter shown in yellow at the bottom of the screen
programmed TIMER
(blue) Select page/chapter shown in blue at the bottom of the screen
MENU Menu : To call up or end main menu

OK Store/Confirm: To store or confirm entry

P pAB Programme number: To select a programme
number up or down
AP q Select: One line up

P rB Select: One line down

SpDC Volume: To regulate the volume

DSr Select: Cursor left

SqC Select: Cursor right

y Volume off: To switch the volume on or off

z Previous programme number: To select the
previous programme number
PLAY G Playback: To play a recorded cassette

H Rewind: During STOP and STANDBY: rewind,
during PLAYBACK: reverse scanning
STOP h Pause/Stop: To stop the tape, except while a
TIMER-recording is being made
&


Front of the set Back of the set




EXT.1 Scart socket: To connect a satellite receiver, decoder, video recorder, etc.
8 Power switch : To switch off the set
Beware: If you switch the set off with the power switch 8 , TIMER-recordings are not 2 Aerial input socket: To connect the aerial cable
possible!

m Standby : To switch off, interrupt a function, interrupt a programmed recording (TIMER)

Pp Programme number : To select programme number up or down

Sp Volume: To regulate the volume

5 Record: To record the programme selected

H Rewind : During STOP and STANDBY: rewind, during PLAYBACK: reverse scanning

I Forward wind: During STOP and STANDBY: forward wind, during PLAYBACK: forward
scanning

G Playback : To play a recorded cassette

? Pause/Stop, eject cassette: To stop the tape and during STOP eject the cassette

AUDIO Audio input socket

VIDEO Video input socket : To connect a camcorder or videogames

w Headphones socket: To connect headphones
OPERATING INSTRUCTIONS PHILIPS 14PV210/07

Congratulations! You now own one of the most sophisticated So that you can identify your machine in the event of theft,
and simple-to-use TV-VIDEO Combinations on the market. enter the serial number (PROD.NO) here. The serial number is
With this TV-VIDEO Combi you can record and play printed on the type plate fixed at the rear of the set.
VHS-standard cassettes.

MODEL NO. 14PV210/07


Please take the time to read this operating manual before PROD.NO: . . . . . .
using your TV-VIDEO Combi.

This product complies with the requirements of the Directive
73/23/EEC + 89/336/EEC + 93/68/EEC.
Safety instructions and other notes
A Danger: High voltage!
Do not remove the top cover as there is a risk of an electrical Technical information
shock!

A The TV-VIDEO Combi does not contain any components that can Measurements in cm (W / H / D): 39.2 / 40.7 / 39.8
be repaired by the customer. To switch off the TV-VIDEO Combi Power consumption (Standby) : less than 45W (less than 4W)
completely you must switch it off with the power switch 8 . Voltage : 198-264V 50Hz
Headphones : Output resistance less than 120 Ohms maximum
B Make sure that air can circulate freely through the ventilation
slots on the TV-VIDEO Combi.
output voltage more than 2.6V at 120 Ohms

B Make sure that no objects or liquids enter the TV-VIDEO Combi.
If liquid is spilt into it, disconnect the TV-VIDEO Combi
immediately from the power supply and call the After-sales Emergency interrupt
Service for advice.

B The TV-VIDEO Combi should not be used immediately after You can use the STANDBY m button on the TV-VIDEO Combi or
transportation from a cold to a hot area or vice versa, or in the remote control to interrupt any function. If you want to
conditions of extreme humidity. interrupt a running Timer recording, hold the STANDBY m
After unpacking the TV-VIDEO Combi, it should be allowed to button for several seconds.
acclimatize for at least three hours before installation. So if you are having operating problems, you can just interrupt
C These operating instructions have been printed on nonpolluting the function and start again.
paper. And you can practise operating your set without any worries.
C Deposit old batteries at the relevant collection points. No matter which buttons you press, you cannot damage it.

C Please make use of the facilities available in your country for
disposing of the packaging of the TV-VIDEO Combi in a way that
helps to protect the environment.

C This electronic equipment contains many materials that can be
recycled. Please inquire about the possibilities for recycling
your old set.

D VIDEOPlus+ and PlusCode are registered trademarks of
Gemstar Development Corporation. The VIDEOPlus+ system is
manufactured under licence from Gemstar Development
Corporation.




1
Special functions on your TV-VIDEO Combi

If a television programme, which transmits TELETEXT, is stored with programme
number 'P01', time and date will be set automatically.

When you have plugged your TV-VIDEO Combi into the mains, you will be
welcomed with an OSD picture. All you have to do is follow the instructions in
the "intelligent help line" for the next step. Enjoy the Automatic TV channel
search/save function and the automatic time adjustment.

Automatic Volume Leveller. It minimises sudden changes in TV volume when
commercial spots are transmitted.

Philips has developed a system which produces the best possible playback
quality. It reduces disturbance on old, worn video cassettes, and emphasises
the detail on very good quality cassettes.

Simple programming system for TV-VIDEO Combis. Makes programming as easy
as making a telephone call. Simply enter the programme code which you will
find in your listings magazine.

We guarantee that your TV-VIDEO Combi will switch to the new millennium with
no problems whatsoever.




2
1. CONNECTING YOUR TV-VIDEO COMBI

Important for the United Kingdom Connecting the cables

This machine is fitted with an approved moulded 13 Amp plug.
To change a fuse in this type of plug, please follow these
instructions.

a Take off the fuse cover and take out the fuse.

b Put in a new fuse which should be a BS1362 3A, A.S.T.A.
or BSI approved type.

c Refit the fuse cover.

If the plug fitted is not suitable for your socket, cut it off and fit
another type.
If the plug you fit contains a fuse, it should be a 3Amp fuse. If
you fit a plug which does not need a fuse, make sure the fuse
on your fuse box is not greater than 5 Amps. a Insert the aerial plug into the 2 socket.
D Note: Please destroy the plug you have cut off so that it
b Insert the plug of the mains cable into the wall socket.
cannot be used in a 13 Amp socket somewhere else.
c If the little red light at the front of the set is not alight,
How to connect a plug
please switch on the set. The power switch 8 is
The wires in the lead from the video recorder are coloured as
located on the left side panel of the set.
follows.
* Blue - 'neutral' ('N').
* Brown - 'live' ('L').
Connecting a decoder or other equipment
d Connect the blue wire to the terminal in the plug which is
marked with the letter 'N' or coloured black. You can also connect additional equipment to the EXT.1
socket. For instance, a satellite receiver, decoder or
e Connect the brown wire to the terminal in the plug which
camcorder.
is marked with the letter 'L' or coloured red.

f Do not connect either of the wires to the terminal in the
plug which is marked with the letter 'E', the symbol \or
coloured green or green and yellow.

Before you refit the plug cover, make sure that the grip at the
bottom of the plug is clamped over the plastic cover of the
lead, not just over the two wires.




4
2. INSTALLING YOUR TV-VIDEO COMBI

Initial installation Allocating a decoder

a Open up the battery compartment of your remote control Some TV stations will send coded TV channels, that you can
and place the batteries in it as shown in the picture. only watch when you use a decoder. You can connect such a
decoder (descrambler) to your TV-VIDEO Combi. With the
following function, the connected decoder will automatically
be activated for the TV programme you want to watch.

a Choose the TV channel on which you wish to use the
decoder with the P pAB button on the TV-VIDEO
Combi or the number buttons 0-9 on the remote control.

b Press the MENU button on the remote control. The main
b Close the battery compartment.
menu will appear.
c If you have connected the aerial to the TV-VIDEO Combi,
c Select the line 'Installation' with the P rB or
press the OK button.
AP q buton and confirm with the SqC button.
'Automatic TV channel search' starts. This picture will
appear on the screen: d Select the line 'Manual store' with the P rB or
AP q button and confirm with the SqC button.

e Select the line 'Decoder' with the P rB or
AP q button.
Searching...
CHANNELS FOUND:


MANUAL STORE


//////,,,,,,,,,,,,,,,,,,,,,
Channel/Frequency FREQU.
Search 125
Fine tuning (,,,,,,n=,,,,,,$
Name edit xxx
Programme number 01
Decoder OFF

Wait until all TV channels have been found. This can take
several minutes.