Text preview for : SB-2H9-0030-B364.pdf part of Kyocera SB-2H9-0030-B364 Kyocera Printer FS-3040-3140MFP SERVICEBULLETIN SB-2H9-0030-B364.pdf
Back to : SB-2H9-0030-B364.pdf | Home
(Page.1/2)
Service Bulletin Ref. No. 2H9-0030 (B364)
November 18, 2011
Preventive Measures for Omitting the ISU Lock Lever Release
Subject
(Reduction of the C3100/ISU Home Position Error)
FS-1028MFP, FS-1128MFP, FS-1024MFP, FS-1124MFP,
FS-3040MFP, FS-3140MFP, FS-3040MFP+, FS-3140MFP+,
Model
FS-3540MFP, FS-3640MFP, FS-C2026MFP, FS-C2126MFP,
FS-C2026MFP+, FS-C2126MFP+, FS-C2526MFP, FS-C2626MFP
Topic
The lock lever is set to lock the ISU during transport. If it was omitted to release the lock lever, the C3100 error (ISU
home position error) will occur when the power is turned ON at setup of the machine. Therefore, a leaflet to instruct
to release the lock lever was newly added.
(Please refer to (2) Removing the Tapes in 1-2-2 Unpacking in the Service Manual.)
Content: Move the lock lever to the position of release*. When turning the power ON with the lock lever
unreleased, error message will be displayed.
*Please turn the power OFF, release the lock lever and turn the power ON again if the 3100 error was caused by
this reason.
Content of the Leaflet
Please refer to the illustration below.
Leaflet
Where to Find the Leaflet
Please refer to the illustration below for the position of the leaflet.
Lock lever
leaflet
Fixing tape
Scanner unit section
KYOCERA MITA Europe B.V.
European Service & Development Center (ESDC)
(Page.2/2)
Service Bulletin Ref. No. 2H9-0030 (B364)
November 18, 2011
KMC's Classification Entire Stock Rework In-Field modification at next visit
In-Field modification by case No modification necessary
Field Measure: Please make sure to release the lock lever before turning the power ON at setup.
Serial Nos. of the Affected Machines: To be informed later
KYOCERA MITA Europe B.V.
European Service & Development Center (ESDC)