Text preview for : 13_Operation Instruction & Installation.pdf part of Samsung 13 Operation Instruction & Installation Samsung LCD TV LN46N71B 13_Operation Instruction & Installation.pdf
Back to : 13_Operation Instruction | Home
10 Operating Instructions and Installation
10 Operating Instructions and Installation
10-1 Front
- The product color and shape may vary depending on the model.
1. SOURCE 5. SPEAKERS
Toggles between all the available input sources (TV,
AV1, AV2, S-Video, Component1, Component2, PC, 6. (POWER)
HDMI). In the on-screen menu, use this button as you Press to turn the TV on and off.
use the ENTER button on the remote control. POWER INDICATOR
Blinks and turns off when the power is on and lights
2. MENU up in stand-by mode.
Press to see an on-screen menu of your TV's features.
7. REMOTE CONTROL SENSOR
3. VOL Aim the remote control towards this spot on the TV.
Press to decrease or increase the volume.
In the on-screen menu, use the VOL buttons
as you use the and buttons on the remote
control.
4. < CH >
Press to change channels. In the on-screen menu,
use the < CH > buttons as you use the and
buttons on the remote control. (Without the Remote
Control, You can turn on TV by using the Channel
buttons.)
10-1
10 Operating Instructions and Installation
10-2 Connection Panel
10-2-1 Rear Panel Jacks
- The product color and shape may vary depending on the model.
1. AV IN 1 5. SERVICE
Video and audio inputs for external devices, such Connector for service only.
as a camcorder or VCR.
6. AUDIO OUT (R/L)
2. COMPONENT IN 1, 2 Connect to the audio input jacks on your Amplifier/
Connect Component video/audio. Home theater.
3. HDMI/DVI IN / DVI IN (AUDIO R/L) 7. PC IN
Connect to the HDMI jack of a device with an HDMI Connect to the video and audio output jacks on
output. Use the HDMI/DVI IN terminal for DVI your PC.
connection to an external device. You should use
the DVI to HDMI cable or DVI-HDMI adapter (DVI to 8. POWER INPUT
HDMI) for video connection, and the DVI IN Connect the supplied power cord.
'R-AUDIO-L' terminal for audio.
- HDMI/DVI IN terminal does not support PC. 9. KENSINGTON LOCK
- No sound connection is needed for an HDMI to The Kensington lock (optional) is a device used to
HDMI connection physically fix the system when used in a public place.
If you want to use a locking device, contact the dealer
4. ANT IN where you purchased the TV.
Connect to an antenna or cable TV system. - The place of the Kensington Lock may be different
depending on its model.
10-2
10 Operating Instructions and Installation
10-2 Connection Panel
10-2-2 Side Panel Jacks
1. AV IN 2
Video and audio inputs for external devices.
S-VIDEO
Video inputs for external devices with an S-Video output.
3. HEADPHONE
Connect a set of external headphones for private listening.
10-3
10 Operating Instructions and Installation
10-3 Remote Control
- This is a special remote control for the visually impaired, and has Braille points on the Power, Channel and Volume buttons.
10-4
10 Operating Instructions and Installation
1. POWER 22. UP / DOWN / LEFT / RIGHT /
Turns the TV on and off. ENTER
2. NUMERIC BUTTONS Use to select on-screen menu items
Press to change the channel. and change menu values.
3. _ 23. INFO
Press to select channels over 100. Press to display information on the TV
For example, to select channel 121, screen.
press " - ", then " 2 ", then " 1 ". 24. CAPTION
4. CH MGR Controls the caption decoder.
Used to display Channel Lists on the 25. STILL
screen. Press to stop the action during a
5. TV particular scene.
Selects the TV mode directly Press again to resume normal video.
6. VOL / VOL 26. P.SIZE
Press to increase or decrease the Press to change the screen size.
volume. 27. PIP FUCTIONS
7. (MUTE) SOURCE : Press to select a signal
Press to temporarily cut off the sound. from an external source in PIP.
8. MENU POSITION : Change the position of
Displays the main on-screen menu. the PIP screen.
9. S.MODE CH : Displays the available channels in
Sound mode selection. sequence. (These buttons change
10. PIP channels in the PIP window only
Picture-in Picture ON/OFF.
11. P.MODE
Picture effect selection.
12. E.SAVING
Adjusts screen brightness to save energy.
13. DNIe(Digital Natural Image engine)
DNIe Demo On/Off
14. MTS
Press to choose stereo, mono or Separate
Audio Program(SAP broadcast).
15. SRS
Selects SRS TruSurround XT mode.
16. SOURCE
Press to display all of the available
video sources.
17. PRE-CH
Tunes to the previous channel.
18. SLEEP
Press to select a preset time interval
for automatic shut off.
19. PC
Selects the PC mode directly
20. CH / CH
Press to change channels.
21. EXIT
Press to exit the menu.
10-5
10 Operating Instructions and Installation
Memo
10-6