Text preview for : R_LILY.PDF part of Unitc R LILY . Rare and Ancient Equipment Unitc Copiers UNITC606 UnitC606 SERVICE.MAN R_LILY.PDF
Back to : R_LILY.PDF | Home
Technical Bulletin No. RTB-001
SUBJECT: Service Manual Correction DATE: 15 Oct. '96
PAGE: 1 of 7
PREPARED BY: M. Furusawa (FCP) FROM: 1st Field Information Dept. QAC
CHECKED BY:
CLASSIFICATION: MODEL:
Action Required Revision of service manual LILY
Troubleshooting Information only (A172 / A199)
Retrofit Information Other
Please correct your service manual as follows, referring to the attached pages already
corrected.
(Corrected or added portions are indicated by thick rectangles.)
Page 1-6
Image Creation : Image Overlay
Basic type does not have this function.
Page 4-31
Dev. Sleeve Cleaning Condition in ACS Mode
The condition "Black mode" should be added to the functional explanation.
Page 4-59
Copier Special Mode
The following remarks have been added:
1. Change the setting from "0" to "4" for "Thick 2nd Feed" in SP <1>-2 By-pass Feed in
order to ensure feeding of very thick paper in Special Mode 1.
2. Printer correction data in this mode is independent from that in the standard mode.
(ACC results will not be reflected.)
Page 5-12
Step 10 (and 11)
Printer Free Run must be used instead of System Free Run.
- Reason -
In System Free Run mode, the test pattern will not be written on the drum surface
but the actual scanned image will be written. If we use the System Free Run mode in
this step, a blank image (= image of white paper) will made on the drum surface,
causing too much friction between drum and drum cleaning blade.
Page 5-22
The following procedure should be added to the transfer roller unit:
A Printer Free Run should be performed after replacing the roller lubricant bar and/or
the transfer roller.
Film Projector Unit Page 1
The weight in the Specifications section should be corrected.
FUNCTIONS: BASIC MODEL VS EDIT MODEL LILY RTB-001 P. 2 of 7
2.2 FUNCTIONS: BASIC MODEL VS EDIT MODEL
This machine comes in two versions. Refer to the following table for features
available on your machine.
Functions Edit type Basic type
Copy Image Density Adjustment (Auto/Manual)
Auto Color Selection
Full Color
Back
Single Color
Twin Color
Original Image Type Selection
Paper Selection (Auto/Manual)
Preset R/E
Reducing/ Zoom
Enlarging Size Magnification
Directional Size Magnification
Poster Mode
Centering/Cornering
Shift/Book Margin Adjustment
Erase
Single Copies
Color Conversion
Color
Creation Color Erase
Color Background
Outline
Positive/Negative
Image Shadow
Creation Mirror
Slanted
Image Repeat
Image Overlay ----
User Color Memory
Color Single Color Adjustment
Adjustment/ Color Balance Adjustment
Memory
Color Balance Sample
Image Adjustment
Area Editing ----
Interrupt Copying
Recall
Auto Reduce/Enlarge
Bypass Feed Copying
Duplex Copying
Default Setting
User Tools
Display Color Full color Black & white
1-6
LILY RTB-001 P. 3 of 7 SERVICE PROGRAM MODE
Page Item Function Note
Auto Process Factory use only "PID" setting must be used.
Control Self
check
Toner Supply Selects toner supply mode. Default: Fuzzy
Control Mode "Fuzzy" setting must be used.
Selection
Transfer Bias Selects the output voltage for Default: Normal
Humidity the transfer belt and the This function is effective under
Selection transfer roller bias that are used the following conditions:
if the humidity sensor is not 1. Humidity sensor is not
working properly. Use the working well:
setting that best approximates