NSE5-006.PDF part of NOKIA NSE5-006 NSE5-006.PDF, NOKIA Mobile Phone Nokia

Text preview for : NSE5-006.PDF part of NOKIA NSE5-006 NOKIA Mobile Phone Nokia_7110 NSE5-006.PDF

Back to : NSE5-006.PDF | Home

CONFIDENTIAL 1 (1)

Nokia Mobile Phones Service Bulletin No. SB-006/24.11.99
Technical Support, Europe & Africa

NSE-5

MCU SOFTWARE VERSION 4.73 & SERVICE SOFTWARE VERSION 241.05.00

MCU software version 4.73 has been released for NSE-5.

CODE DESCRIPTION
0775225 SW MCU NSE-5 CD

Service software version 241.05.00 has been released for NSE-5.

CODE DESCRIPTION
0774234 SW SERVICE NSE-5 3'' DISK

Notes for service software:

Known error: User Settings Transfer fails when SIM card is not present or
the PIN code has not been entered.

1. If problems arise when downloading Calling Line Icons (CLI) after flashing:
- If download of CLI fails after flashing the phone UI probably needs
to be initialised. Select menu items and Default Values>. Then try to download CLI.

2. If problems arise when downloading Wake Up Graphics (WUG) after
flashing:
- If downloading of WUG fails after flashing then close the "Restore
Default User Setting" Dialog and the Flash dialog. Select menu
item and check mark
"Graphical Welcome Message" and select

3. If problems arise with Call Registers after flashing:
- If Call registers do not work after flashing the phone UI probably
needs to be initialised. Select menu items and UI/DEV Default Values>. If it still not work then try to re-flash the
phone and give the phone time to wake up etc during flashing.

4. If problems arise when flashing with FPS-4:
- If there is a ROM- or PPM checksum failure a dialog box will pop-
up and say so. In that case the phone will NOT wake up by itself.
You can try to turn on the phone and select and Test> and run MCU ROM Checksum- and PPM Checksum test. If
those passes the phone is probably OK, try to re-flash the phone.

NSE-5 SB-006