42PDP-01T.pdf part of Akai 42PDP-01T 42PDP-01T.pdf, Akai Цифры 42PDP-01T 42PDP-01T.pdf text manual preview

Text preview for : 42PDP-01T.pdf part of Akai 42PDP-01T Akai Цифры 42PDP-01T 42PDP-01T.pdf

Back to : 42PDP-01T.pdf | Home

SAFETY PRECAUTIONS
(MODULE(SET) USE AND CONSIDERATIONS IN SERVICING)
PDP Module(set) is a display device to be divided into a Panel part and a Drive part
(a mechanical part). The Panel part consists of Electrodes, Phosphor, various dielectrics
and gas, and the Drive part includes electronic circuitry and PCB. (The mechanical part
includes mask assembly,backcover and others parts).
When using / handling this PDP Module/set, pay attention to the below warning and
cautions.Indicates a hazard that may lead to death or injury if the warning is ignored and the
product is handled incorrectly.
Indicates a hazard that can lead to injury or damage to property if the caution is ignored and
the product is handled incorrectly.
. WARNING
(1) Do not supply a voltage higher than that specified to this product. This may damage the
product and may cause a fire.
(2) Do not use this product in locations where the humidity is extremely high, where it may be
splashed with water, or where flammable materials surround it.
Do not install or use the product in a location that does no satisfy the specified
environmental conditions.
This may damage the product and may cause a fire.
(3) If a foreign substance (such as water, metal, or liquid) gets inside the product,
immediately turn off the power.Continuing to use the product, it is may cause fire or
electric shock.
(4) If the product emits smoke, and abnormal smell, or makes an abnormal sound,
immediately turn off thepower.Continuing to use the product, it may cause fire or electric
shock.
(5) Do not disconnect or connect the connector while power to the product is on. It takes
some time for the voltage to drop to a sufficiently low level after the power has been
turned off.
Confirm that the voltage has dropped to a safe level before disconnecting or connecting
the connector.
(6) Do not pull out or insert the power cable from/to an outlet with wet hands. It may cause
electric shock.
(7) Do not damage or modify the power cable. It may cause fire or electric shock.
(8) If the power cable is damaged, or if the connector is loose, do not use the product:
otherwise, this can lead to fire or electric shock.
(9) If the power connector or the connector of the power cable becomes dirty or dusty, wipe it
with a dry cloth.Otherwise, this can lead to fire.
(10) PDP Module(set) uses a high voltage (Max.450V dc). Keep the cautions concerning
electric shock and do not touch the Device circuitry when handling the PDP Unit. And
because the capacitor of the Device circuitry may remain charged at the moment of
Power OFF, standing by for 1 minute is required in order to touch the Device circuitry.
. CAUTIONS
(1) Do not place this product in a location that is subject to heavy vibration, or on an unstable
surface such as an inclined surface. The product may fall off or fall over, causing injuries.
(2) Before disconnecting cable from the product, be sure to turn off the power. Be sure to
hold the connector when disconnecting cables. Pulling a cable with excessive force may
cause the core of the cable to be exposed or break the cable, and this can lead to fire or
electric shock.
(3) This product should be moved by two or more persons. If one person attempts to carry
this product alone,he/she may be injured.
(4) This product contains glass. The glass may break, causing injuries, if shock, vibration,
heat, or distortion is applied to the product.
(5) The temperature of the glass of the display may rise to 80