SB-2K3-0011-B124_2.pdf part of Kyocera SB-2K3-0011-B124 2 SB-2K3-0011-B124_2.pdf, Kyocera Printer FS-6025-6030MFP SERVICEBULLETINS SB-2K3-0011-B124

Text preview for : SB-2K3-0011-B124_2.pdf part of Kyocera SB-2K3-0011-B124 2 Kyocera Printer FS-6025-6030MFP SERVICEBULLETINS SB-2K3-0011-B124_2.pdf

Back to : SB-2K3-0011-B124_2.pdf | Home

(Revised Issue 2) (Page.1/3)

Service Bulletin Ref. No. 2K3-0011 (B124)
May 18, 2011

Subject Firmware Upgrade (Upgrade Pack Ver. V2.00)
FS-6025MFP_FS-6030MFP_v02.00.0010_(2011-04-11)
Model FS-6030MFP, FS-6025MFP, FS-6025MFP/B
This time, the description with (-->) was revised from the previous information.
The detailed illustration of the content of change No.5 was added on page 3.
The description of the content of No.10 was corrected (F65B F56B) on page 3.

Topic
The firmware was upgraded as follows.

Content of Changes
1. Measures against JAM5001 (Bridge conveying sensor 3 non arrival jam)
2. Implementation of U605 [Data clear]
3. Measures against the image failure when adjusting the scanner magnification in the main scanning direction with
U065 [Adjusting the scanner magnification]
4. Support for KMTW
5. Change of the default display when the Favorite button is pressed
6. Measures against the model name change error after the main board was replaced (No problem arises with FS-
models.)
7. Implementation of U265 [Set Model Destination]
8. New customized operation panel using FMU
9. Measures against the address book search error
10. Measures against the system error F56B with SMB Send

Type Program No. Ver. Remarks
Upgrade Pack Ver. (-->)2K3_V2.00 (-->)2.00
MAIN 2K3_2F00.002.351 002.351 New upgrade
MMI 2K3_7000.002.347 002.347 New upgrade
ENGINE 2K3_1000.005.002 005.002 New upgrade
LANGUAGE BR 2K3_81BR.001.006 001.006 For KMBR *1 New upgrade
LANGUAGE KR 2K3_81KR.001.005 001.005 For KMKR *1 New upgrade
LANGUAGE CN 2K3_81CN.001.006 001.006 For KTST *1 New upgrade
LANGUAGE TW 2K3_81TW.001.004 001.004 For KMTW *1 New firmware
IO 2K3_1E00.001.010 001.010
DP 3M8_9500.003.001 003.001
FAX BOOT/APL 5JR_5500.B02.001 B02.001 BOOT(B01.019), APL(B01.019)
ESPECIAL ES_SKIP.ON ----------

For the KM sales companies, it is possible to download the firmware at the download center on the ESDC.net.
When upgrading the firmware or replacing a board, please upgrade each kind of the firmware (MAIN, ENGINE and MMI) to
the latest version at the same time.
*1: The firmware above is not included in the upgrade pack. Please individually download it from the ESDC.net.

KYOCERA MITA Europe B.V.
European Service & Development Center (ESDC)
(Revised Issue 2) (Page.2/3)

Service Bulletin Ref. No. 2K3-0011 (B124)
May 18, 2011

KMC's Classification Entire Stock Rework In-Field modification at next visit
In-Field modification by case No modification necessary
Field Measure: Please upgrade the firmware when the phenomenon described above arises.

Serial Nos. of the Affected Machines: Planned from April 2011 production

Contents of Changes

No. Item Details CTL Ver.

1 Measures against JAM5001 The leading edge of paper might stop at the roller on the DF side of the 551944 ENG
(Bridge conveying sensor 3 bridge unit in the conditions below when paper is continuously fed from
non arrival jam) the standard cassette and ejected to DF-470, which causes
JAM5001(Bridge conveying sensor 3 non arrival jam) might occur.
Therefore, this was corrected.
[Conditions]
Affected model: 25cpm machine with DF-470 and AK-470. (PF is not
installed.)
Paper size: Letter, A4 (fed widthwise)
[Change]
The time to remove the chattering of the bridge conveying sensor
(conveying sensor 2) varies depending on existence of PF. However,
there was little time margin. Accordingly, the time to remove the chattering
was changed from 20msec to 200mse to resolve this. (Chattering is
recognized as arrival of next paper and the machine waits for next paper.
However, J5001 appears after the jam detection timeout.)

conveying sensor 2
2 Implementation of U605 [Data U605 was newly implemented to execute [Data clear]. 535035 ENG
clear]
3 Measures against the image Black streaks might appear on the output after copying in monochrome 540401 ENG
TC-11-003
failure when adjusting the with enlargement set by U065 [Adjusting the scanner magnification].
scanner magnification in the Therefore, this was corrected.
main scanning direction with
U065 [Adjusting the scanner
magnification]
4 Support for KMTW The first production for KMTW is supported. LAN

5 Change of the default display The default display after the Favorite button is pressed was changed so MAIN
when the Favorite button is that the function name layout can be easily changed.
pressed

KYOCERA MITA Europe B.V.
European Service & Development Center (ESDC)
(Revised Issue 2) (Page.3/3)

Service Bulletin Ref. No. 2K3-0011 (B124)
May 18, 2011
No. Item Details CTL Ver.

6 Measures against the model The model name shown on the startup display and output reports might MAIN
name change error after the be changed to FS-model name after the main board for service was
main board was replaced (No installed. Therefore, this was corrected.
problem arises with FS- [Cause]
models.)
Model name data stored in the engine board should be originally written to
the main board. However, the data in the main board was actually written
to the engine board. Since the default model name data in the main board
for service was FS-model, it was written to the engine board resulting in
operation with FS-model name.
[Change]
The change was made so that the data in the engine board can be written
to the main board (original operation).
7 Implementation of U265 [Set U265 was newly implanted to set the model destination. MAIN
Model Destination]
8 New customized operation Customized operation panel is now available to support the workflow MAIN
MMI
panel using FMU template by using FMU (File Management Utility).
9 Measures against the address When searching data in the address book, [Not registered] message
book search error might appear although the data was registered. Therefore, this was
corrected.
10 Measures against the system The system error F56B might appear when scanning large size data to
error (-->)F56B with SMB small size data with the settings below. Therefore, this was corrected.
Send (PDF file, B/W mode, Continuous scan ON, Table scan)

(-->)
5. Change of the default display when the Favorite button is pressed

(Old) (New)

KYOCERA MITA Europe B.V.
European Service & Development Center (ESDC)