Text preview for : 05_Disassembly_and_Reassembly.pdf part of Samsung 05 Disassembly and Reassembly Samsung Laptop NP-R60 Схема и сервис мануал на Samsung NP-R60 05_Disassembly_and_Reassembly.pdf
Back to : 05_Disassembly_and_Reasse | Home
- This Document can not be used without Samsung's authorization -
4. Assembly and Disassembly
Area Picture Description
1. AC adapter and battery have to be
disassembled before dissembling system.
2. Separate battery to point 2 direction after
ove KNOB to point 1.
3. Battery will be dissembled when push
lightly upper side.
Main
System
4. Remove screws on bottom side.
- M2.6 L8 : 16pcs
- M2 L7 : 2pcs
- M2 L4 : 3pcs
5. Remove HDD door.
6. Remove Memory door.
7. Remove ODD.
4-1
- This Document can not be used without Samsung's authorization -
4. Assembly and Disassembly
Area Picture Description
8. Pull out to arrow side gripping handle to
separate HDD from system.
* Caution
- Be careful when push the HDD to the rea
r side.
HDD must be removed before turning upside
down the system.
9. Remove Wireless LAN card after
dissembling Wireless LAN Antenna.
- M2 L4 : 1pcs
* Caution
- PRAHA have only one Wireless Antenna.
Main
System
10. Lift up Memory module by doing like
point 1 and pull out module from socket.
11. Remove screw of ODD side.
- M2 L3 : 1pcs
4-2
- This Document can not be used without Samsung's authorization -
4. Assembly and Disassembly
Area Picture Description
12. Bottom view after remove HDD, WLAN,
Memory, ODD module.
13. Remove top cover pushing hook of point
1 hook and remove keyboard pushing hook
of point
* Caution
Lift up Top cover after fully openning the lid.
Main
System
14. Use tweezers, wooden cutter, '-' driver t
o disassemble Topcover.
15. Use tweezers, wooden cutter, '-' driver
to disassemble Keyboard.
* Caution
1. Be careful of injury and scratch of Top s
urface when use instruments.
2. Don't lift up Keyboard highly.
4-3
- This Document can not be used without Samsung's authorization -
4. Assembly and Disassembly
Area Picture Description
16. Lift up FPC Connector cover like a
picture and disassemble Keyboard FPC.
* Caution
Don't lift up FPC Connector cover highly.
That may cause Connector crash.
17. Disassemble 4 cables to remove Top ass
y.
Main
System
18. Disassemble Touchpad FFC after lifting
up FPC Connector cover.
* Caution
Don't lift up FPC Connector cover highly.
That may cause Connector crash.
19. Disassemble Speaker Cable by pulling
out the connector like a picture.
4-4
- This Document can not be used without Samsung's authorization -
4. Assembly and Disassembly
Area Picture Description
20. Disassemble LCD Cable by pull out left
direction.
* Caution
If lift up Top without disconnection of LCD
Cable, that may cause LCD connector crash..
21. Pull out the Wireless LAN Antenna from
bottom side carefully.
Main
System
22. Pull out the Wireless LAN Antenna from
bottom side carefully.
23. Disassembly LCD Ass'y from System after
remove 2 screws.
- M2.6 L8 : 2pcs
4-5
- This Document can not be used without Samsung's authorization -
4. Assembly and Disassembly
Area Picture Description
24. After disassembly LCD Ass'y.
25. Pull out from right and disassemble top
assy..
Main
System
26. Remove 5pcs screws to disassemble
Mainboard, FAN, Bluetooth and remove
Bluetooth cable.
- M2 L4 : 5pcs
27. Disassemble FAN power cable and
remove FAN.
4-6
- This Document can not be used without Samsung's authorization -
4. Assembly and Disassembly
Area Picture Description
28. Remove Mainboard from right side as
like picture.
* Caution
If lift up from left side, that may cause
crash of some ports
29. Bottom after removing the Main Board.
Main
System
30. Remove 7pcs screws to disassemble
Heat Pipe and MDC.
- M2 L4 : 1pcs
- Special Screw : 6pcs
31. Turn screw like a picture and lift up the
CPU.
* Caution
Be care of not to bend CPU Pin.
4-7
- This Document can not be used without Samsung's authorization -
4. Assembly and Disassembly
Area Picture Description
32. Remove 2 screws to disassemble Express
Frame.
- M2 L6 : 2pcs
33. Lift up metal latch using driver to dis
assemble express frame.
* Caution
Be care of not to bend.
Main
System
34. Pull out to right direction and
disassemble express frame.
39. The Main Board after removing the
Thermal Duct, Heatsink, CPU, Express Frame,
and MDC
4-8
- This Document can not be used without Samsung's authorization -
4. Assembly and Disassembly
Area Picture Description
1. Remove speaker.
Top
Ass'y * Caution
Touchpad module is fixed using by tape on
Top
1. Remove 5 screws after detaching rubber.
- M2 L6 : 5pcs
2. Use tweezers, wooden cutter or '-' driver
when remove rubbers.
LCD * Caution
Ass'y Be careful of injury and scratch of LCD Fro
nt surface when use instruments.
3. Disassemble the LCD Front like a picture..
* Caution
Be careful of injury and scratch of LCD Fro
nt surface when use instruments.
4-9
- This Document can not be used without Samsung's authorization -
4. Assembly and Disassembly
Area Picture Description
4. Disassemble the LCD Module and Inverter
from LCD Back after removing 7 screws.
- M2 L6 : 7pcs
5. Disassemble the Bracket Upper after
removing 2 screws.
- M2 L4 : 2pcs
LCD
Ass'y
6. Lift up the Knob latch after removing the
Spring like a picture
7. LCD Back after removing the LCD Module,
Bracket Upper and Knob Latch.
4-10
- This Document can not be used without Samsung's authorization -
4. Assembly and Disassembly
Area Picture Description
8. Disassemble 3pcs connector from LCD
Module.
9. Disconnect the LCD Module from Inverter
like a picture.
LCD
Ass'y
10. isconnect the LCD Cable from Inverter
like a picture.
11. Disconnect the LCD Cable from LCD
Module like a picture after detaching the
silver adhesive.
4-11
- This Document can not be used without Samsung's authorization -
4. Assembly and Disassembly
Area Picture Description
12. Disassemble the LCD L, R Bracket after
removing 6 screws.
- M2 L3 : 6pcs
* Caution
Be care of not scratch the LCD surface whe
n remove screws.
13. LCD Module after removing LCD Cable, L,
R Bracket and Inverter
LCD
Ass'y
4-12