Text preview for : DA4030-TE.pdf part of MAKITA DA4030-TE MAKITA DA4030-TE.pdf
Back to : DA4030-TE.pdf | Home
T ECHNICAL INFORMATION
Models No. DA4030, DA4031
PRODUCT
P 1 / 13
Description Angle Drill 13mm (1/2")
CONCEPTION AND MAIN APPLICATIONS W
These models are Makita's new 13mm (1/2") Angle Drills.
And they are optimum for pro's close-quarter works in corners,
between joists or studs. H
* Model DA4030 is a single-speed drill; features superb drilling
capacities, and targets electricians who drill more than
300 holes a day.
CH
* Model DA4031 is a two-speed drill. L
While having the same benefits as DA4030,
DA4031 features torque limiter in low speed,
Dimensions: mm (")
and targets plumbers; in low speed, powerful enough
to smoothly drill large holes for pipe or conduit. Model No. DA4030 DA4031
Length (L) 417 (16-3/8) 462 (18-1/4)
Width (W) 102 (4) 102 (4)
Height (H) 148 (5-7/8) 148 (5-7/8)
Specifications Center height (CH) 40 (1-9/16) 40 (1-9/16)
Continuous Rating (W)
Voltage (V) Current (A) Cycle (Hz) Max. Output(W)
Input Output
110 10.0 50 / 60 1,050 400 1,200
120 10.0 50 / 60 (1,150) 400 1,200
230 4.8 50 / 60 1,050 400 1,200
240 4.6 50 / 60 1,050 400 1,200
Specifications Model DA4030 DA4031
Chuck capacity: mm (") 2 - 13 (1/16 - 1/2) 2 - 13 (1/16 - 1/2)
No load speed: (min-1=rpm) 1,200 300/1,200
Auger bit 38 (1-1/2) 38 (1-1/2)
Cutting Wood in high speed mode 118 (4-5/8)
capacities: Selfeed bit 65 (2-9/16)
in low speed mode 65 (2-9/16)
mm (")
Hole saw 152 (6) only in low speed mode
Steel 13 (1/2) 13 (1/2)
in high speed mode 80
Max. torque: (N.m) 80
in low speed mode 145
Torque limiter No Yes ( only in low speed)
Reversing switch Yes Yes
Swivel-type rear handle Yes Yes
Protection from electric shock Double insulation Double insulation
Cord length: m (ft.) 2.5 (8.2) 2.5 (8.2)
Net weight: Kg (lbs) 4.8 (10.6) 5.6 (12.3)
Standard equipment Optional accessories
* Chuck key .............1 pc. * Key holder 13 .................. 1 pc. * Drill chuck S13
* Hex wrench................ 1 pc. * Plastic carrying case ........ 1 pc. * Chuck key
* Grip 27....................... 1 pc. * Grip 27
* Hex wrench
* Plastic carrying case
Features and benefits P 2 / 13
Model DA4030, DA4031
Superiority to competitors
in drilling capacity
Numbers in chart below are relative values
when setting the capacity of Competitor's Mod. B as 100.
(Mod. DA4031 only)
Material : 6 layered SPF, Material : A piece of SPF Material : A piece of SPF
Employed bit : Auger Bit 1-1/2" Employed bit : Selfeed Bit 2-9/16" Employed bit : Selfeed Bit 4-5/8"
DA4030,
135 120 105
DA4031
Competitor A
100 100 100
Mod. A
Competitor B 100 100
100
Mod. B
0 50 100 150 0 50 100 150 0 50 100 150
Palm-fitting soft grip
Torque limiter (only Mod.DA4031)
The shock can be suppressed, when
the drill bit is locked.
Front handle with space
for storing hex wrench
with which the front handle
Toolless swivel handle
can be detached.
Handle can be swiveled
without any tool at 90