Text preview for : acc-150.pdf part of CANON acc-150 CANON Copiers GP 405 ServBull ServBullGP405 acc-150.pdf
Back to : acc-150.pdf | Home
Service Bulletin COPIER
Issued by Canon Europa N.V.
Model : Finisher-D1 No.: Acc-150 Rev. 1
Finisher-E1 (FF-T01-W-000058-02)
DATE: 10.09.99
Location : INTRODUCING A NEW TOOL
Subject : DOWNLOADING USING FINISHER DOWNLOADER PCB
Reason : This bulletin communicates how to download from a computer (PC) through a downloader PCB as a
means of upgrading the ROM of a finisher.
Details : 1. Applicable Models
May be used for the following two models:
Finisher-E1
Finisher-D1
Figure 1-1 Figure 1-2
-1/9-
Acc-150 Rev. 1
2. Components of the Downloader PCB (FY8-2034-000)
[5 ] [8 ] [1 ] [2 ] [3 ] [4 ] [7 ] [6 ]
Figure 2-1
Names and Functions of the Parts
Ref. Name Remarks
[1] START/STOP button Press it to start/stop downloading.
[2] LOAD LED Remains on when downloading is ready.
[3] Model indicator LED Remains on when the Finisher-D1 is connected.
[4] Power indicator LED Remains on when the downloader PCB is supplied
with power by the finisher.
[5] RS-232C cable Use it to connect the downloader PCB to a
(straight, full connection; 9-pin) computer. Be sure to make a connection so that the
ferrite core of the cable is on the computer side.
[6] Cable A (9-pin; about 70 cm in length) Use it to connect the PCB to the Finisher-D1.
[7] Cable B (7-pin; about 50 cm in length) Use it to connect the PCB to the Finisher-E1.
[8] RS-232C connector Use it to connect the RS-232C cable to the PCB.
Table 2-1
3. Related Tool
For downloading, you must obtain the following item: