Text preview for : Service Bulletin OST-F1206.PDF part of DENON Service Bulletin OST-F1206 DENON DVD Video Player DVD Video Player Denon - DVD-2930 & 2930CI Service Bulletin OST-F1206.PDF
Back to : Service Bulletin OST-F120 | Home
100 Corporate Drive Mahwah, NJ 07430
Service Bulletin
No. : OST-F1206
Date: August 8, 2007
_____________________________________________________________
Model: DVD-2930CI
Subject: Firmware Correction
Symptom: 1) When the "Track Skip Fwd/Rev" button is pushed early two times
or more when the CD-DA disc is in PAUSE, "Play" button commands are not
accepted.
2) The SACD disc where the DST compression recording was done by the All
Repeat function is played. Noise might occur when returning to the first track
after the final track at that time.
3) The repeat function was turned on when the SACD disc had stopped and
played, or the SACD disc is played with the All Repeat function. Afterwards, the
repeat function doesn't operate when stopping and playing.
4) DVD-AUDIO cannot be played. (It is not possible to play at the probability of
0.04% by combining the device key and MKB.)
5) AC-3 protected with CSS is converted in PCM and the SPDIF digital outputs
are 24 bits.
6) When the equipment with a non-certificated HDCP output TV is connected
with the DVD-3930CI player, the picture is output.
7) When the image of 576i is output, APS of WSS is wrong.
8) A/V Receiver (AVR4308CI etc.) for CEC and the DVD player are connected.
The HDMI output of DVD player doesn't go out when "Function switch" of A/V
Receiver is selected.
9) The DVD player is set to RGB 480i/576i. When both 2440