Text preview for : 4530_5530 U-Maintenance.pdf part of Kyocera 4530 5530 U-Maintenance Kyocera Copiers KM4530_5530 4530_5530 U-Maintenance.pdf
Back to : 4530_5530 U-Maintenance.p | Home
2BC/D
1-4-2 Maintenance mode
The copier is equipped with a maintenance function which can be used to maintain and service the machine.
(1) Executing a maintenance item
Start
Enter "10871087" using
Maintenance mode is entered.
the numeric keys.
Enter the maintenance item
number using the cursor up/down keys
The maintenance item is
or numeric keys.
selected.
Press the start key.
The selected maintenance item is run.
Press the stop/clear key.
Yes Repeat the same
maintenance item?
No
Yes
Run another maintenance
item?
No
Enter "001" using the cursor
up/down keys or numeric keys Maintenance mode is exited.
and press the start key.
End
1-4-8
2BC/D-1
(2) Maintenance mode item list
Item Initial
Section Maintenance item contents
No. setting*
General U000 Outputting an own-status report --
U001 Exiting the maintenance mode --
U002 Setting the factory default data --
U003 Setting the service telephone number ***************
U004 Setting the machine number 000000
U005 Copying without paper --
U018 Displaying the ROM checksum --
U019 Displaying the ROM version --
Initialization U020 Initializing all data --
U021 Initializing all memory --
U022 Initializing backup memory --
U024 HDD formatting --
Drive, paper U030 Checking motor operation --
feed, paper U031 Checking switches for paper conveying --
conveying and
U032 Checking clutch operation --
cooling system
U033 Checking solenoid operation --
U034 Setting paper timing