Text preview for : ARP3174_PDP-434PE.pdf part of Pioneer ARP3174 PDP-434PE Pioneer PDP PDP-434 PDP-434 ARP3174_PDP-434PE.pdf
Back to : ARP3174_PDP-434PE.pdf | Home
ORDER NO.
ARP3174
PDP-434PU
PLASMA DISPLAY
PDP-434PU
PDP-434PE
PRO-434PU
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model Type Power Requirement Remarks
PDP-434PU TUCK AC110 - 240V
PDP-434PE WYVI6 AC220 - 240V
PDP-434PE WYVI6XK AC220 - 240V
PRO-434PU KUC AC120V
This service manual should be used together with the following manual(s).
Model No. Order No. Remarks
PDP-434PU/ TUCK ARP3175 SCHEMATIC DIAGRAM and PCB CONNECTION DIAGRAM
PDP-434PE/ WYVI6
PDP-434PE/ WYVI6XK
PRO-434PU/ KUC
Confirm it
Serial No.
WYVI6 SS
For details, refer to "Important symbols for good services". WYVI6XK UK
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2003 T-ZZY SEPT. 2003 printed in Japan
1 2 3 4
SAFETY INFORMATION
A
This service manual is intended for qualified service technicians ; it is not meant for the casual
do-it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have been
trained to properly and safely repair complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may
void the warranty. If you are not qualified to perform the repair of this product properly and safely,
you should not risk trying to do so and refer the repair to a qualified service technician.
WARNING
This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of California to
cause cancer, birth defects or other reproductive harm.
B Health & Safety Code Section 25249.6 - Proposition 65
NOTICE
(FOR CANADIAN MODEL ONLY)
Fuse symbols (fast operating fuse) and/or (slow operating fuse) on PCB indicate that replacement parts
must be of identical designation.
REMARQUE
(POUR MOD