2MH-001.pdf part of Kyocera 2MH-001 2MH-001.pdf, Kyocera Printer FS-1030MFP-1035MFP-1130-1135 SERVICEBULLETIN 2MH-001.pdf text manual preview

Text preview for : 2MH-001.pdf part of Kyocera 2MH-001 Kyocera Printer FS-1030MFP-1035MFP-1130-1135 SERVICEBULLETIN 2MH-001.pdf

Back to : 2MH-001.pdf | Home

Service Bulletin
SB Number: SB 2MH-001 Creation Date: 06/12/2011
Subject: Engine firmware upgrade information
Model: FS-1030MFP/1130MFP/1035MFP/1135MFP

Contents
Please restart the machine by completely disconnecting and reconnecting the Power cord after upgrading
the Engine firmware.

1. Engine Firmware
The LCD display remains powered and the power is not turned OFF, when pressing the power switch after
Upgrading the Engine firmware. Therefore, it is necessary to disconnect and reconnect the power cord in
order to turn the power OFF and ON. After reconnecting the power cord, the machine starts up and the LCD is
powered. After this, the machine should reach the [Ready] state.

2. Other Firmware
The procedure has not been changed.
Please turn the power OFF and ON after upgrading the Firmware.

KMIS Service Department, Kyocera Mita Europe Page 1 of 1 B413 / SB 2MH-001