Text preview for : LS0810-TE.pdf part of MAKITA LS0810-TE MAKITA LS0810-TE.pdf
Back to : LS0810-TE.pdf | Home
T ECHNICAL INFORMATION
Models No. LS0810
New Tool
Description MAKITA 210mm(8-1/4") Miter saw
CONCEPTION AND MAIN APPLICATIONS 270
This machine is the desktop miter saw having the link
function(interlocking function) for the handle and the safety
cover. If the handle is lowered(start to cut), the safety cover will
start to open even if it does not touch the material, and it will be
385
opened up to the necessary angle without damaging the
material. Except that the open/close function of the safety cover
is different, all other features are same as LS0800, M241. M242
or the sister version of the LS0810 comprises the motor coated
with the light green color in general. Note that only the one
coated with the red color for exclusive export to America and 390
Canada is manufactured so far.
Specifications
Continuous Rated
Voltage (V) Current (A) Cycle (Hz) Max. Output(W)
rating input(W) output(W)
100 11.0 50/60 1050 620 810
115 7.3 50/60 800 440 860
200 5.5 50/60 1050 620 810
220 3.8 50/60 800 440 860
230 3.7 50/60 800 440 860
240 3.5 50/60 800 440 860
*All the main functions are same as LS0800-M241.
No Load Speed(min.) Rotation per minute 5000/min.
Saw blade(mm) Inner dia 25mm, 25.4mm
Outer dia. domestic 200-216mm
export 200-210mm
Max. cutting capacity(mm) Right angle(0) cutting in 55mmx130mm
(When outer dia. of a saw blade height, in width
is 210mm) 45angle cutting in height, 55mmx95mm
in width
52angle cutting in height, 55mmx81mm (when the stiffening
in width plate with thickness of 3 mm is
placed between the guide rule and
the material)
Net Weight 5.6kg
domestic 5m
Cord length(m)
export 2.5m
Standard equipment
Holder assembly --- One set(for receiving the lengthy material)
Dust bag assembly --- One set
Box wrench 9 --- One piece(for detaching the saw blade)
Vice assembly --- One set(only for export)
(Same as LS0800, M241.)
The standard equipment for the tools shown may differ form country to country.
Optional accessories
Distributable ruler assembly(only for domestic)
Vice assembly(only for domestic)
Table set parts.
Saw blade (Same as LS0800, M241): Chip saw(No.210-11B18-teeth), Chip saw(No.210-11C40-teeth), Chip
saw(No.210-11E80-teeth), Combination(No.210-7A30-teeth)
Features and benefits
The safety cover will be opened/closed automatically in sequential operation with the up/down motion of the handle
through the link function. It includes the following features.
1) Since the safety cover will start to open without touching the material, it may not damage the material.
2) The pressing force of the safety cover prevents the cutting chips from being caught in the saw blade when
touching.
3) The safety cover may not open by touching with the side face or the underside at top dead center(when the
motor is raised at upper limit) of the handle, but cover most of the saw blade section.
(* Other features are same as LS0800, M241.)
Repair
* If the up/down motion of the handle becomes heavy due to the insufficient
turning of the ring 8 mounted near the center of the safety cover, repair in
the following orders. Disconnect the + pan head screw M6 and clean the
dust accumulated inside the ring 8 and on the + pan head screw and flat
washer 6, lubricate the oil, and then assemble. Do not strongly fasten the
screw in this case, which may potentially damage the female screw. The
screw should be fastened in a degree like fastening the normal M4
screw.(fastening torque : 10-15 kgf-cm)
* Others are same as LS0800, M241.
Safety cover
Flat washer6
Ring 8
+ pan head screw M6