Text preview for : DF-074.pdf part of Kyocera DF-074 Kyocera Printer _OPTIONS DF-780 SERVICEBULLETINS DF-074.pdf
Back to : DF-074.pdf | Home
Service Bulletin
SB Number: SB DF-074 Creation Date: 23/06/2010
Subject: Firmware upgrade (Error code after sleep mode recovery)
Model: DF-780/780(B)
Affected models: TASKalfa250ci/300ci/400ci/500ci/300i/420i/520i/552ci
Item Contents
1 Error code C8360 Error code C8360 (Slide motor error) may occur during sleep mode recovery, when pressing
the start key after a stapling job has been cancelled.
2 Paper stack Phenomenon
adjustment failure Paper stack adjustment failure may occur, when stapling the A4 sized paper stack.
Cause
The corner of the rear edge of the paper stack may contact the inside wall of the staple unit.
Solution
The paper stack passing position has been relocated 4 mm to the machine rear side.
Please replace the PBA-control-KM with the latest type to implement the solution.
Firmware
Type Program No. Check SUM Version
DF-780/780B (1000) 5JA_9200.007.005 66ED 007.005
Parts
No. Old Parts New Parts Description Q'TY Interchange- SP
No. No. ability
Old New Old New
1 305JA71604 305JA71605 PBA-CONTROL-KM 1 1 O O O
5JA71604 5JA71605
Classification Entire stock rework In-field modification at next visit X In-field modification by case No modification necessary
Field measure When the above mentioned phenomena occur, please upgrade the firmware to the latest version.
To improve the paper stack adjustment, please replace the PBA-control-KM with the latest type.
Serial numbers of affected machines
Type Serial number
DF-780/780(B) Not available
KMIS Service Department, Kyocera Mita Europe Page of A078 / SB DF-074