Text preview for : FUJIFILM_FinePix_A400_500.rar part of Fujifilm FinePix A400 500 Fujifilm Cameras FUJIFILM_FinePix_A400_500.rar
Back to : FUJIFILM_FinePix_A400_500 | Home
DIGITAL CAMERA
FinePix A500
SERVICE MANUAL
US/CA/EU/EG/EE/AS/CH/JP-Model
CAUTION
BECAUSE THIS PRODUCTIS RoHS LEAD-FREE COMPLIANT, USE THE DESIG-
NATED AFTER-SELES PARTS AND THE DESIGNATED LEAD-FREE SOLDER WHEN
PERFORMING REPAIRS. (Refer to page 3 to page 5)
WARNING
THE COMPONENTS IDENTIFIED WITH THE MARK " " ON THE SCHEMATIC
DIAGRAM AND IN THE PARTS LIST ARE CRITICAL FOR SAFETY.
PLEASE REPLACE ONLY WITH THE COMPONENTS SPECIFIED ON THE SCHEMATIC
DIAGRAM AND IN THE PARTS LIST.
IF YOU USE PARTS NOT SPECIFIED, IT MAY RESULT IN A FIRE AND AN
ELECTRICAL SHOCK.
Ref.No.:ZM00623-101
FUJI PHOTO FILM CO., LTD. Printed in Japan 2006.02
FinePix A500 Service Manual
SAFETY CHECK-OUT
After correcting the original problem, perform the following
safety check before return the product to the customer.
1. Check the area of your repair for unsoldered or poorly 7. CAUTION: FOR CONTINUED
soldered connections. Check the entire board surface PROTECTION AGAINST FIRE
for solder splasher and bridges. HAZARD, REPLACE ONLY WITH
SAME TYPE 2.5 AMPERES 125V
2. Check the interboard wiring to ensure that no wires are FUSE.
"pinched" or contact high-wattage resistors.
2.5A 125V
RISK OF FIRE- ATTENTION: AFIN D'ASSURER
REPLACE FUSE
3. Look for unauthorized replacement parts, particularly AS MARKED UNE PROTECTION
2.5A 125V
transistors, that were installed during a previous repair. PERMANENTE CONTRE LES
Point them out to the customer and recommend their RISQUES D'INCENDIE,
replacement. REMPLACER UNIQUEMENT
PAR UN FUSIBLE DE MEME,
4. Look for parts which, though functioning, show obvious TYPE 2.5 AMPERES, 125 VOLTS.
signs of deterioration. Point them out to the customer
and recommend their replacement. 8. WARNING:
TO REDUCE THE ELECTRIC
5. Check the B + voltage to see it is at the values SHOCK, BE CAREFUL TO
specified. TOUCH THE PARTS.
WARNING!
6. Make leakage - current measurements to determine HIGH VOLTAGE
that exposed parts are acceptably insulated from the
supply circuit before returning the product to the
customer.
2
FinePix A500 Service Manual
RoHS lead-free compliance
Because this product is RoHS lead-free compliant, use the designated after-sales parts and the designated lead-free solder
when performing repairs.
With the exception of parts and materials expressly excluded from the RoHS directive (*1), all the internal connections and
component parts and materials used in this product are lead-free compliant (*2) under the European RoHS directive.
*1: Excluded items (list of the main lead-related items)